ACSR SPLICING SLEEVE PROTECTOR SPLICE PROTECTION SLEEVES
Product introduction
Splicing protection sleeve is apply to protecting conductor pressure crimping tube on ACSR paying off and make it avoid torsion when pass through pulleys.
Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off.
The splicing protection sleeve must be selected according to the conductor specification (crimping tube specification), and correspond one by one. If the size of crimp tube is different from the standard, the dimension of splicing protection sleeve or crimping tube should be indicated in the contract.
Conductor SPLICE PROTECTION SLEEVES TECHNICAL PARAMETERS
|
Item number |
Model |
Main size(MM) |
Application conductor(MAX) |
|||
|
D |
L |
d |
L1 |
|||
|
17201 |
J240B |
Φ45 |
850 |
Φ38 |
530 |
LGJ240/55 |
|
17202 |
J300B |
Φ51 |
940 |
Φ43 |
600 |
LGJ300/50 |
|
17203 |
J400B |
Φ57 |
995 |
Φ47 |
665 |
LGJ400/50 |
|
17204 |
J500B |
Φ68 |
1080 |
Φ56 |
740 |
LGJ500/65 |
|
17205 |
J630B |
Φ83 |
1180 |
Φ63 |
800 |
LGJ630/55 |
|
17206 |
J720B |
Φ83 |
1196 |
Φ63 |
816 |
LGJ720/55 |
|
17207 |
J900B |
Φ89 |
1180 |
Φ73 |
800 |
LGJ900/75 |
|
17208 |
J1000B |
Φ95 |
1400 |
Φ75 |
1020 |
LGJ1000/80 |
|
17209 |
JBZ1250 |
Φ114 |
2280 |
Φ86 |
1190 |
JL1/G2A-1250 |
Related products
-
POWER TOWER POLE ERECTION ALUMINUM ALLOY A-SHAP...
Product introduction A-Shape Gin Pole is used for transmission and distribution line engineering, sling tower material, positioning pulley set use. A-Shape Gin Pole assembling power stringing tower. The specification of holding pole is divided into 250, 300, 350, 400, 500 and 600 mm2 according to the section. The required length ranges from 3-22 m. The corresponding load is 26-275KN. The main material adopts right angle aluminum titanium alloy section, rivet joint ma...
-
Observe conductor Sagging measuring scope Radia...
Product introduction Zoom Sag Scope is suitable for accurate conductor sag measurements by means of the parallelogram method and different length method. Equipped with a special anchoring support for steel tower. Fix the Zoom Sag Scope on the electric tower. Adjust the level，Keep the Zoom Sag Scope horizontal. Adjust the lens to observe object in different distance. First loosen the tight ring, than adjust till the cross in lens is clear to be seen, and tighten the...
-
Personal Safety Grounding Equipment Overhead Li...
Product introduction Security earth wire is suitable for transmission lines,power plants and substation equipment,short circuit grounding for power outage maintenance. The complete set of security earth wire consists of insulated operating rod with conductive clip, grounding flexible copper wire with transparent sheath, grounding pin or grounding clip. The conductive clamp is divided into: double spring conductive clamp and circular spiral conductive clamp used to c...
-
PARALLEL GRIPPER Earth Wire Come Along Clamp PA...
Product introduction Earth Wire Gripper is suitable for the steel strand adjustment of the guyed tower and the ground wire tightening. 1.High class steel forged, thick&heavy, quality guaranteed. 2.Compact, smooth gap, thickness enhaced pulling handle, flexible&easy use. 3.The clamp adopts antiskid processing, with pretightening force. 4. All gripping jaws are produced with new technology to increase jaw life. 5. The parallel clamping structure is adopted, so...
-
TRIANGULAR SECTION HORIZONTAL PLATFORM STRUCTUR...
Product introduction The hanging ladder can be used for corner tower hanging operations, etc. When hanging a ladder horizontally, one end of the ladder is hung on the cross arm angle iron, and the other end of the ladder is hung on the wire. Hanging ladders can also be used vertically. Item No [L] [A] [B] [B1] [C] [D] m mm mm mm mm mm 22251 1.5 220 900 100 320 320 22252 2.5 220 900 100 320 320 22253 3 220 900 100 320 320 22255 10 220 ...
-
COME ALONG CLAMP ALUMINUM ALLOY CONDUCTOR WIRE ...
Product introduction 1. The body of multi-segment type gripper is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according...