Balancing Anti Twist Board Twist preventer traction OPGW Head Board

Short Description:

The OPGW Head Board is used for pulling optical cables. Guide the optical cable into the pulley groove and prevent the optical cable from jumping out of the pulley groove.


Product Detail

Product Tags

Product introduction

Uses:for OPGW construction.

The OPGW Head Board is used for pulling optical cables. Guide the optical cable into the pulley groove and prevent the optical cable from jumping out of the pulley groove.

If the optical cable is twisted during traction, it will be damaged. OPGW Head Board can prevent optical cable from twisting during traction.

OPGW Head Board TECHNICAL PARAMETERS

Item

number

Structural

Style

Rated Load

(KN)

Hammer

length

(Rubber tube)(m)

Hammer

weight

(kg)

Main Series

Length (Chain)(m)

Weight
(kg)

20111B

Chain Type

30

3×2

3×9

9

40


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 660mm Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

      660mm Wheels Sheaves Bundled Wire Conductor Pul...

      Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances,its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximu...

    • Aluminum Nylon Sheave Conductor Aerial Cable Roller Stringing Pulley

      Aluminum Nylon Sheave Conductor Aerial Cable Ro...

      Product introduction  Aerial Cable Roller Stringing Pulley is used to aerial electric power, communication cable and power cable construction . 10228 Suitable for ABC cable(bunch). Other pulleys are applicable to aerial electric power,communication cable and power cable. The sheaves of Aerial Cable Stringing Roller are made of aluminum alloy or high strength MC nylon. All the sheaves are mounted on ball bearings. The frame of pulley is made of galvanized steel. The ...

    • Grip Cable Socks Mesh Cable Net Sleeve Conductor Mesh Socks Joint

      Grip Cable Socks Mesh Cable Net Sleeve Conducto...

      Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off ...

    • Diesel Engine Gasoline Powered Winch Cable Double Drum Winch

      Diesel Engine Gasoline Powered Winch Cable Doub...

      Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The...

    • Optical Fiber Cable Stringing Block Cable OPGW Stringing Pulley

      Optical Fiber Cable Stringing Block Cable OPGW ...

      Product introduction  The optical cable pulley is mainly used for laying various optical cables in the air. The sheaves are made of high strength MC nylon. The bottom of the pulley groove is provided with a small groove through the optical cable. All the sheaves are mounted on ball bearings. The frame of block is made of galvanized steel. U-shaped hanging plate is used for the head of the pulley, or the hanging plate shown the same as the single wheel paying off pull...

    • Traction Anti Twist Wire Rope Cable Joints Connector Anti-twist Fixed Joint

      Traction Anti Twist Wire Rope Cable Joints Conn...

      Product introduction  Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes. The minimum traction load is 10KN, and the maximum traction load is 25KN. The anti-twist fixed joint is made of 40 chrome alloy steel. 1. High strength, small size, light weight, and good looking. 2. It smoothly can pass through the corners, pulley, tension machine, traction machine and other equipmen...