China wholesale Cable Duct Mouth Pulley Factory – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power
China wholesale Cable Duct Mouth Pulley Factory – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power Detail:
Product introduction
Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
According to the ground environment and usage habits, the cable roller has three structures. Respectively: casting aluminum structure, steel plate structure and steel pipe structure. Steel pipe structures are also divided into simple and reinforced structures
Common cable pulley specifications include outer diameter 120mm* wheel width 130mm, outer diameter 140mm* wheel width 160mm, outer diameter 120mm* wheel width 200mm and outer diameter 140mm* wheel width 210mm, etc.
Nylon sheaves are represented by N letters.The rest are aluminum sheaves. The steel wheel needs to be customized.
Ground Cable Roller Technical Parameters
|
Item number |
Model |
Applicable Cabe（MM） |
Rated load (kN) |
Carrier Structure |
Weight (kg) |
|
21171 |
SHL1 |
≤ Φ150 |
5 |
Casting Aluminum |
5.4 |
|
21172 |
SHL1N |
5 |
3.6 |
||
|
21181 |
SHL1B |
≤ Φ150 |
5 |
Steel Plate |
5.5 |
|
21182 |
SHL1BN |
5 |
3.7 |
||
|
21183 |
SHL2BN |
≤ Φ160 |
5 |
5.5 |
|
|
21184 |
SHL3BN |
≤ Φ200 |
5 |
8.0 |
|
|
21191 |
SHL1G |
≤ Φ150 |
5 |
Steel Pipe |
5.1 |
|
21192 |
SHL1GN |
5 |
3.3 |
||
|
21193 |
SHL2GN |
≤ Φ160 |
5 |
6.5 |
|
|
21194 |
SHL3GN |
≤ Φ200 |
5 |
8.5 |
Product detail pictures:
Related Product Guide:
Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for China wholesale Cable Duct Mouth Pulley Factory – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power , The product will supply to all over the world, such as: Madras, Johannesburg, Tajikistan, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
By Barbara from Iraq - 2017.09.16 13:44
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Deirdre from Panama - 2017.10.25 15:53
Related products
-
OEM Strong Nylon Rope Manufacturer – Cu...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
OEM Cable End Stripper Supplier – Grip ...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
China wholesale Upright Pulley Block Factory &#...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
OEM Rope Retention Pulley Supplier – Hi...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Heavy Duty Swivel Joint Manufac...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
China wholesale Rope Block And Tackle Manufactu...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...