China wholesale Force Dynamometer Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Aluminium Cable Clips, Rope Block And Tackle Pulley, Galvanized Wire Rope Clips, With superb service and quality, and an enterprise of foreign trade featuring validity and competitiveness, that will be trusted and welcomed by its clients and creates happiness to its employees.
China wholesale Force Dynamometer Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power Detail:

Product introduction

As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.

The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.

Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.

When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.

The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.

The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.

We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.

Cable Mesh Socks Joint TECHNICAL PARAMETERS 

Item number

Model

Applicable

Cable Diameter

(mm)

Rated Load

(KN)

Weight

(kg)

21361

SWL-16

Φ12-16

10

0.8

21362

SWL-20

Φ16-20

10

0.8

21363

SWL-25

Φ20-25

15

1.0

21364

SWL-37

Φ25-37

15

1.0

21365

SWL-50

Φ37-50

15

1.0

21366`

SWL-60

Φ50-60

25

2.4

21367

SWL-80

Φ60-80

25

2.4

21368

SWL-100

Φ80-100

25

2.4

21369

SWL-120

Φ100-120

30

2.6

21370

SWL-150

Φ120-150

30

2.6

21371

WT-100

Φ88-100

100

3.5

21371A

WT-115

Φ100-115

100

3.5

21371B

WT-130

Φ115-130

100

4

21371C

WT-150

Φ130-150

100

4.5

21371D

WT-180

Φ150-180

100

5

21372

WT-185

Φ180

200

6

21373

WT-240

Φ240

300

8

21374

WT-250

Φ250

300

8

21375

WT-280

Φ280

300

9



Product detail pictures:

China wholesale Force Dynamometer Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Force Dynamometer Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Force Dynamometer Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Force Dynamometer Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Force Dynamometer Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures


Related Product Guide:

With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for China wholesale Force Dynamometer Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Rwanda, Colombia, Portugal, We aim to build a famous brand which can influence a certain group of people and light up the whole world. We want our staff to realize self-reliance, then achieve financial freedom, lastly obtain time and spiritual freedom. We do not focus on how much fortune we can make, instead we aim to obtain high reputation and be recognized for our goods. As a result, our happiness comes from our clients satisfaction rather than how much money we earn. Ours team will do best for you personally always.
  • The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Laura from Barcelona - 2018.12.10 19:03
    It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Hannah from Madrid - 2018.09.29 13:24
    Write your message here and send it to us

    Related products

    • OEM Lifting Sheaves Factory –  Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power

      OEM Lifting Sheaves Factory – Tower hoi...

      Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...

    • China wholesale Hydraulic Cable Punching Machine Manufacturer –  Heavy Duty Crimp Cable Press-Fit Split-Type Hydraulic Crimping Pliers – Donghuan Power

      China wholesale Hydraulic Cable Punching Machin...

      Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...

    • China wholesale Swivel Hook Pulley Factory –  High Speed Planetary Gearbox Tugger Fast Power Cable Pulling for Lifting and Traction Gasoline Diesel Electric Powered Capstan Winch – Don...

      China wholesale Swivel Hook Pulley Factory R...

      Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...

    • China wholesale Chain Hoist Motor Manufacturers –  Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power

      China wholesale Chain Hoist Motor Manufacturers...

      Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...

    • OEM Ratchet Hoist Mechanism Manufacturers –  Diesel Engine Gasoline Powered Winch Electric Cable Double Drum HOIST WINCH Double Drum Winch – Donghuan Power

      OEM Ratchet Hoist Mechanism Manufacturers ̵...

      Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...

    • OEM Single Swivel Pulley Factory –  ERECTION POWER TOWER ALUMINUM INNER-SUSPENDED TUBULAR GIN POLE – Donghuan Power

      OEM Single Swivel Pulley Factory – EREC...

      Product introduction Used for transmission and distribution line engineering, sling tower material, positioning pulley set use. assembling power stringing tower. The main material adopts high strength aluminum alloy pipe, rivet joint makes, portable and durable. It is mainly made of high-strength aluminum alloy pipes of 2 specifications. The specifications are: outer diameter 150mm * thickness 6mm and outer diameter 120mm * thickness 7mm. Single arm type, no direction restriction, easy to use...