China wholesale Hex Hydraulic Crimping Tool Suppliers – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power
China wholesale Hex Hydraulic Crimping Tool Suppliers – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power Detail:
Product introduction
Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering.
The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.).
The specifications and models of hydraulic crimping pliers range from 60 tons to 300 tons, and customers can choose the appropriate model according to their needs. The selection principle of hydraulic crimping pliers is that large hydraulic crimping pliers can be used to crimp small-size crimping pipes, but small hydraulic crimping pliers cannot be used to crimp large-size crimping pipes, otherwise the crimping will be unstable.
The crimping die is selected according to the model of the hydraulic crimping pliers and the specification of the crimping pipe. Neither big nor small.
Hydraulic crimping pliers is suitable for the crimping of large-size crimping pipes. For power cable conductors, oil pressure copper and aluminum terminals and connecting tubes.
Tightly press on the 10kv-500kv high-voltage cable bushing, clamp the end, use hexagonal mold, crimp tightly, conduct electricity well, and it is not easy to fall off and conduct heat well.
Hydraulic Crimping Pliers Technical Parameters
|
Item number |
16103 |
16103A |
16104 |
16105 |
16106 |
|
Model |
YJD-600 |
YJD-1000 |
YJD-1250 |
YJD-2000 |
YJD-3000 |
|
Crimping force |
60T |
100T |
125T |
200T |
300T |
|
Crimping range |
14-55mm |
14-76mm |
14-76mm |
14-90mm |
14-100mm |
|
Crimping type |
hexagon crimping |
hexagon crimping |
|||
|
Stroke |
24mm |
24mm |
35mm |
35mm |
|
|
Heigth |
approx.370mm |
approx.480mm |
|||
|
Weight （KG） |
approx.N.W20KG G.W30KG |
approx.N.W30KG G.W40KG |
approx.N.W50KG G.W60KG |
approx.N.W85KG G.W95KG |
approx.N.W120KG G.W130KG |
|
Package |
wooden case |
wooden case |
|||
Product detail pictures:
Related Product Guide:
It is a good way to improve our products and service. Our mission is to develop creative products to customers with a good experience for China wholesale Hex Hydraulic Crimping Tool Suppliers – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power , The product will supply to all over the world, such as: Southampton, Estonia, Turkey, We have won a good reputation among overseas and domestic clients. Adhering to the management tenet of "credit oriented, customer first, high efficiency and mature services", we warmly welcome friends from all walks of life to cooperate with us.
By Anastasia from Guyana - 2018.06.09 12:42
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Isabel from Curacao - 2017.10.27 12:12
Related products
-
China wholesale Nylon Polypropylene Rope Manufa...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Ground Wire Clamp Factory ̵...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
OEM Hand Ratchet Cable Cutters Factory – ...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
China wholesale Chain Lift Hoist Manufacturer &...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Cable Pulling Winch Manufacturer – ...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Braided Cable Cutter Factory – ALUM...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...