China wholesale Manual Winch Lift Supplier – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power
China wholesale Manual Winch Lift Supplier – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power Detail:
Product introduction
The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out.
Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge .
The max pull for conductor–stringing operation can preset ,automatic overload protection system .
Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
With hydraulic pulling rope clamp,replacing steel rope conveniently.
With wire rope automatic winding device,automatic rope laying,loading and unloading convenience.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400
Hydraulic Traction Technical Parameters
| Item number | 07001 | 07011 | 07031 | 07041 | 07051 | 07061 | 07065 | 07071 | 07075 | |
| Model | QY-30Y | QY-40Y | QY-60Y | QY-90Y | QY-180Y | QY-220Y | QY-250Y | QY-300Y | QY-420Y | |
| Maximum pull forc (KN) |
30 | 40 | 60 | 90 | 180 | 220 | 250 | 300 | 420 | |
| Continuous pull forc (KN) |
25 | 35 | 50 | 80 | 150 | 180 | 200 | 250 | 350 | |
| Maximum pull force (KM/H) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Bottom of groovr diamere (MM) |
Φ300 | Φ400 | Φ460 | Φ520 | Φ630 | Φ760 | Φ820 | Φ960 | Φ960 | |
| Number of groovr (MM) |
7 | 7 | 7 | 7 | 9 | 10 | 10 | 10 | 11 | |
| Maximum suitable stell rope diamete (MM) |
Φ13 | Φ16 | Φ18 | Φ20 | Φ24 | Φ30 | Φ32 | Φ38 | Φ45 | |
| Maximum through connectors diamete (MM) |
Φ40 | Φ50 | Φ60 | Φ60 | Φ63 | Φ75 | Φ80 | Φ80 | Φ80 | |
| Engine power/speed (KW/RPM) |
31/ 2200 |
60/ 2000 |
77/ 2800 |
123/ 2500 |
209/ 2100 |
243/ 2100 |
261/ 2100 |
298/ 2100 |
402/ 2100 |
|
| Dimensions (M) |
3.2 x1.6×2 |
3.5 x2x2 |
3.8 x2.1×2.3 |
3.5 x2.1×2.5 |
5.5 x2.2×2.6 |
5.7 x2.3×2.6 |
5.8 x2.4×2.6 |
5.9 x2.5×2.9 |
6.1 x2.6×2.8 |
|
| Weight (KG) |
1500 | `2500 | 3000 | 4300 | 7500 | 8000 | 9000 | 11500 | 14800 | |
| matching wire rope tray | Mode | GSP 950 |
GSP 1400 |
GSP 1400 |
GSP 1400 |
GSP 1600 |
GSP 1600 |
GSP 1600 |
GSP 1900 |
GSP 1900 |
| Item No. | 07125A | 07125C | 07125C | 07125C | 07125D | 07125D | 07125D | 07125E | 07125E | |
Product detail pictures:
Related Product Guide:
With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of China wholesale Manual Winch Lift Supplier – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power , The product will supply to all over the world, such as: Plymouth, Holland, Puerto Rico, Our solutions are produced with the best raw materials. Every moment, we constantly improve the production programme. In order to ensure better quality and service, we now have been focusing on the production process. We have got high praise by partner. We are looking forward to establishing business relationship with you.
By Sahid Ruvalcaba from Holland - 2017.12.31 14:53
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Irma from Sevilla - 2018.06.03 10:17
Related products
-
China wholesale Cablecutters Factory – ...
Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...
-
OEM Galvanized Rope Pulley Manufacturers –...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Traction Rope Supplier – High Speed...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Nylon Thin Rope Supplier –...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Small Hydraulic Puller Factory – He...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
OEM Cable Clamp Manufacturer – Wire Lay...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...