China wholesale Overhead Cable Clamp Manufacturer – Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power
China wholesale Overhead Cable Clamp Manufacturer – Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power Detail:
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
10 |
30 |
80±1 |
18 |
100 |
230±2 |
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Product detail pictures:
Related Product Guide:
With our superb management, potent technical capability and strict quality command procedure, we go on to provide our shoppers with trustworthy high-quality, reasonable costs and outstanding services. We goal at becoming considered one of your most trustworthy partners and earning your pleasure for China wholesale Overhead Cable Clamp Manufacturer – Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Munich, moldova, Oslo, Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We're doing everything to supply our customers with best services and best solutions . We promise that we are going to be responsible all the way to the end once our services begin.
By Elsie from UK - 2018.09.21 11:01
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Jean from Congo - 2017.01.11 17:15