China wholesale Sheave Block Supplier – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power
China wholesale Sheave Block Supplier – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power Detail:
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
|
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
|
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
|
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
|
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
|
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
|
10 |
30 |
80±1 |
18 |
100 |
230±2 |
|
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
|
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
|
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
|
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Product detail pictures:
Related Product Guide:
We've been committed to offering easy,time-saving and money-saving one-stop purchasing support of consumer for China wholesale Sheave Block Supplier – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power , The product will supply to all over the world, such as: Buenos Aires, Netherlands, Casablanca, "Create Values,Serving Customer!" is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, Please contact with us now!
By Mark from Liverpool - 2018.05.13 17:00
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Alexia from Milan - 2017.09.29 11:19
Related products
-
China wholesale Chain Hoist Motor Manufacturers...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Cable Duct Mouth Roller Suppliers – ...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Large Wire Clips Factory –...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
OEM Scaffold Pulley Rope Manufacturers – ...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
China wholesale Electrical Cable Drum Rollers M...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
China wholesale Chains And Lifting Tackle Suppl...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...