China wholesale Single Sheave Snatch Block Supplier – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power
China wholesale Single Sheave Snatch Block Supplier – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power Detail:
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
|
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
|
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
|
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
|
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
|
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
|
10 |
30 |
80±1 |
18 |
100 |
230±2 |
|
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
|
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
|
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
|
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Product detail pictures:
Related Product Guide:
Using a total scientific good quality management process, superior high quality and excellent faith, we get great name and occupied this field for China wholesale Single Sheave Snatch Block Supplier – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power , The product will supply to all over the world, such as: Cambodia, Victoria, South Korea, Company name, is always regarding quality as company' s foundation, seeking for development via high degree of credibility , abiding by ISO quality management standard strictly, creating top-ranking company by spirit of progress-marking honesty and optimism.
By Sophia from Rome - 2018.12.30 10:21
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Liz from Malaysia - 2017.09.26 12:12
Related products
-
China wholesale Manual Wire Strippers Factory &...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
OEM With Brake Paying Off Frame Manufacturer &#...
Product introduction Cable Pulleys should always be used when pulling cables.When cables need to pass through pipes, use the Pipe Cable Pulley. Pulleys of corresponding sizes can be selected according to different cable diameters. The maximum cable outer diameter applicable to the Pipe Cable Pulley is 200mm. The most important feature, Pipe Cable Pulley is inserted into the cable duct, because the tube is long enough, it doesn’t need to lock. When you use it, please nicely palce in the...
-
China wholesale Steel Rope Winch Suppliers R...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Five Sheave Pulley Block Factory – ...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Chain Block Crane Manufacturers...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
OEM Hydraulic Line Crimping Machine Manufacture...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...