China wholesale Wire Rope Clip Cable Clamp Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking to your belief of "Creating solutions of high quality and generating buddies with people from all around the world", we always put the fascination of customers to start with for Sheaves Crane, Cable Reel Stand, Steel Cable Pulley Block, Good quality would be the key factor to the company to stand out from other competitors. Seeing is Believing, want far more info? Just trial on its items!
China wholesale Wire Rope Clip Cable Clamp Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power Detail:

Product introduction

As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.

The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.

Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.

When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.

The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.

The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.

We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.

Cable Mesh Socks Joint TECHNICAL PARAMETERS 

Item number

Model

Applicable

Cable Diameter

(mm)

Rated Load

(KN)

Weight

(kg)

21361

SWL-16

Φ12-16

10

0.8

21362

SWL-20

Φ16-20

10

0.8

21363

SWL-25

Φ20-25

15

1.0

21364

SWL-37

Φ25-37

15

1.0

21365

SWL-50

Φ37-50

15

1.0

21366`

SWL-60

Φ50-60

25

2.4

21367

SWL-80

Φ60-80

25

2.4

21368

SWL-100

Φ80-100

25

2.4

21369

SWL-120

Φ100-120

30

2.6

21370

SWL-150

Φ120-150

30

2.6

21371

WT-100

Φ88-100

100

3.5

21371A

WT-115

Φ100-115

100

3.5

21371B

WT-130

Φ115-130

100

4

21371C

WT-150

Φ130-150

100

4.5

21371D

WT-180

Φ150-180

100

5

21372

WT-185

Φ180

200

6

21373

WT-240

Φ240

300

8

21374

WT-250

Φ250

300

8

21375

WT-280

Φ280

300

9



Product detail pictures:

China wholesale Wire Rope Clip Cable Clamp Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Wire Rope Clip Cable Clamp Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Wire Rope Clip Cable Clamp Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Wire Rope Clip Cable Clamp Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

China wholesale Wire Rope Clip Cable Clamp Manufacturers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures


Related Product Guide:

Good quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is regularly observed and pursued by our company for China wholesale Wire Rope Clip Cable Clamp Manufacturers – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Slovak Republic, French, Jersey, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
  • Problems can be quickly and effectively resolved, it is worth to be trust and working together.
    5 Stars By Victor Yanushkevich from Thailand - 2017.10.27 12:12
    This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
    5 Stars By Ryan from Angola - 2017.05.31 13:26
    Write your message here and send it to us

    Related products

    • OEM Auger Tie Down Anchors Factory –  Model SLX Connect Pulling Wire Rope Connecting Rotary Cable Connector Swivel Joint – Donghuan Power

      OEM Auger Tie Down Anchors Factory – Mo...

      Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...

    • China wholesale Cable Tension Clamp Suppliers –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power

      China wholesale Cable Tension Clamp Suppliers &...

      Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...

    • OEM FIve Pulley Block And Tackle Manufacturer –  Large diameter stringing block cable pulley block stringing pulley  with grounding roller – Donghuan Power

      OEM FIve Pulley Block And Tackle Manufacturer &...

      Product introduction The Stringing Pulley With Grounding Roller is used to release the induced current on the line during the setting out construction. The conductor is located between the grounding pulley and the main pulley. The conductor is in contact with the grounding pulley, and the induced current on the conductor is released through the grounding wire connected with the grounding pulley. Avoid accidental electric shock of construction personnel. The Stringing Pulley With Grounding Rol...

    • OEM Adjustable Wire Clamp Supplier –  Wire Laying Construction Steel Cable Socks Mesh Sleeve Cable Net Sleeve Conductor Mesh Socks Joint – Donghuan Power

      OEM Adjustable Wire Clamp Supplier – Wi...

      Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...

    • OEM Corner Cable Pulley Suppliers –  Customized Durable Wheel With Bearing Aluminium Alloy Sheave Neoprene Lined Wheel Nylon Wheel – Donghuan Power

      OEM Corner Cable Pulley Suppliers – Cus...

      Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances,its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...

    • OEM Chain Block Hoist Suppliers –  Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power

      OEM Chain Block Hoist Suppliers – Tower...

      Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...