Manual Foot Electric HIGH PRESSURE HYDRAULIC PUMP
Product introduction
Hydraulic pump range: manual hydraulic pump and electric hydraulic pump. Both manual pump and electric pump adopt：The output pressure of the hydraulic pump can reach 70MPa. High and low speed two stage design is for quick oil output.
Electric hydraulic pump equipped withOver pressure safety valve unit could avoid over pressure damage.
Double speed high performance pumps, built in pressure overflow valve, can ensure the maximum flow when maximum pressure. When the output hydraulic pressure exceeds 70MPa, the pressure can be released automatically.
HYDRAULIC PUMP TECHNICAL PARAMETERS
|
Item number |
16164 |
16164A |
16164B |
16153-1 |
16153-2 |
16153-3 |
|
Model |
CP-700 |
CP-700A |
CFP-800B |
ZCB6-5-AB |
ZCB6-5-A3 |
ZCB6-5-ABC |
|
Type |
hand pump |
hand pump |
foot pump |
double-acting |
single-acting |
Three-acting |
|
Rated Output |
/ |
/ |
/ |
750W/1500W |
750W/1500W |
1500W |
|
Voltage |
/ |
/ |
/ |
220W/380W |
220W/380W |
220V/380V |
|
Frequency |
/ |
/ |
/ |
50-60HZ |
50-60HZ |
50-60HZ |
|
Rated Pressure |
70MPa |
70MPa |
70MPa |
70MPa |
70MPa |
70MPa |
|
Flow Rate |
low pressure 13cc |
low pressure 13cc |
low pressure 13cc |
low pressure 2.5L/Min |
low pressure 2.5L/Min |
low pressure 2.5L/Min |
|
high pressure 2.3cc |
high pressure 2.3cc |
high pressure 2.3cc |
high pressure 0.52(1.7)L/min |
high pressure 0.52(1.7)L/min |
high pressure 1.7L/min |
|
|
Oil Capacity |
900cc |
2700cc |
600cc |
8L/30L |
8L/30L |
30L |
|
Weight(KG) |
N.W9.5kg G.W10.9kg |
N.W14.1kg G.W15.5kg |
N.W9.8kg G.W10.8kg |
N.W26kg G.W30kg |
N.W25kg G.W29kg |
N.W37kg G.W40kg |
|
Package |
paper box |
paper box |
paper box |
wooden case |
wooden case |
wooden case |
Related products
-
MULTIFUNCTIONAL COPPER GENERATRIX HYDRAULIC BUS...
Product introduction Multi-function Bus-bar Processing: Cutting, Punching, Bending(horizontal and vertical), Crimping and Embossing, etc. Select the type according to the Bus-bar specification and bus processing requirements. It has the following functions: With three functions, cutting, punching and bending. With four functions, cutting, punching, bending and crimping. With four functions,cutting, punching and bending(horizontal and vertical). Other functions, such...
-
Gasoline Electric Power Conductor Cable Crimpin...
Product introduction The ultra high pressure hydraulic pump adopts gasoline power or electric power, and the output hydraulic pressure can reach 80MPa. Used together with crimping pliers and suitable crimping die, it is mainly used for conductor hydraulic crimping and cable hydraulic crimping. The output hydraulic pressure of the ultra-high pressure hydraulic pump rises rapidly, and the maximum output pressure can be reached instantly. At the same time, the output h...
-
HYDRAULIC CUTTING TOOL STEEL WIRE ROPE HYDRAULI...
Product introduction The hydraulic wire rope cutter is a special tool for cutting steel wire rope. The hydraulic wire rope cutter is composed of end base, base plate, piston, piston rod, end cap, power, fixed knife, fixed knife base, oil cylinder, shell, pump body, pump core, lifter, O-ring, pull arm and other parts. Based on the hydraulic transmission principle, press the actuating hand up and down, press the movable piston of the oil pump, and the power extends ou...
-
PORTABLE Flat Vertical Bending MANUAL BENDER HY...
Product introduction Portable hydraulic bus bar bender is durable due to fixed structure, and bending plane is adopted for support. Equipped with scale plate, the portable hydraulic bus bar bender can look for the bending angle. And bending range is from 0 to 90 °. Working with a manual hydraulic pump or an electric hydraulic pump. Different types of hydraulic bus-bar benders are selected according to the width and thickness of the bus and whether the plane bending...
-
HYDRAULIC CRIMPING TOOL QUICK Integral HYDRAULI...
Product introduction 1. The integral hydraulic crimping pliers has a double speed action: a fast advancing speed for rapid approach of the blades to the connector and a slower more powerful speed for crimping. Two-stage hydraulic system to improve work efficiency and more effort. 2. Novel head design, it can flip head. For easy and comfort operation, the tool head can rotate 180 degress. 3. The built-in safety valve will by-pass the oil supply when the maximum press...
-
Thin Iron Plate Punching Reserved Hole Punching...
Product introduction Hydraulic Punching Machine is suitable for punching thin iron plates that have been integrally formed, such as switch box panels, the surfaceof the paint will not be damaged after the perforation. The standard mold is round hole mold. The punching plate is 3.5mm thick. Punchable round hole, elliptical hole, square hole, etc. The mold size can be customized according to the requirements of the user. HYDRAULIC PUNCHING TOOLS TECHNICAL PAR...