Measuring High Voltage Audible Visual Alarm High-voltage Electroscope

Short Description:

The high voltage electroscope is made of electronic integrated circuit and has stable and reliable performance. It has the features of full circuit self checking function and strong anti-interference. High voltage electroscope is applicable to the power inspection of 0.4, 10KV, 35KV, 110KV, 220KV, 330KV, 500KV AC power transmission and distribution lines and equipment.


Product Detail

Product Tags

Product introduction 

The high voltage electroscope is made of electronic integrated circuit and has stable and reliable performance. It has the features of full circuit self checking function and strong anti-interference. High voltage electroscope is applicable to the power inspection of 0.4, 10KV, 35KV, 110KV, 220KV, 330KV, 500KV AC power transmission and distribution lines and equipment. It can correctly and reliably inspect power no matter during the day or at night, indoor substations or outdoor overhead lines.
When using electroscope, it must be noted that its rated voltage is compatible with the voltage level of the electrical equipment being tested, otherwise it may endanger the personal safety of the electrical testing operator or cause misjudgment. During the electricity inspection, the operator shall wear insulating gloves and hold the handshaking part below the protective ring of the cover. First press the self inspection button to confirm that the electroscope is in good condition, and then conduct the inspection on the equipment that needs electricity inspection. During the inspection, the electroscope shall be gradually moved closer to the equipment to be tested until it touches the conductive part of the equipment. If the process is silent and light indicates all the time, it can be determined that the equipment is not charged. Otherwise, if the electroscope suddenly lights up or makes a sound during the moving process, That is to say, the equipment is considered to be charged, and then the moving can be stopped and the electricity inspection can be ended.

High-voltage Electroscope Technical Parameters

Item number

Rated Voltage(KV)

Effective

Insulation Length(mm)

Extension(mm)

Constriction(mm)

23105

0.4

1000

1100

350

23106

10

1000

1100

390

23107

35

1500

1600

420

23108

110

2000

2200

560

23109

220

3000

3200

710

23109A

330

4000

4500

1000

23109B

500

7000

7500

1500

High voltage discharge lever Technical Parameters

Item number Rated Voltage(KV) Ground wire Extension(mm) Constriction(mm)
23106F 10 4mm2-5m 1000 650
23107F 35 4mm2-5m 1500 650
23108F 110 4mm2-5m 2000 810
23109F 220  4mm2-5m 3000 1150

 


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Stringing Construction Bundled Conductor Aerial Helicopter Stringing Pulley

      Stringing Construction Bundled Conductor Aerial...

      Product introduction In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying. The guide rope enters the pulley groove through the guide rope guide arm, eccentric rotating door and other mechanisms in the Aerial Helicopter S...

    • ACSR SPLICING SLEEVE PROTECTOR SPLICE PROTECTION SLEEVES

      ACSR SPLICING SLEEVE PROTECTOR SPLICE PROTECTIO...

      Product introduction  Splicing protection sleeve is apply to protecting conductor pressure crimping tube on ACSR paying off and make it avoid torsion when pass through pulleys. Splicing protection sleeve is composed of two half steel pipes and four rubber heads. It is used to protect the crimping pipe and prevent the crimping tube from directly contacting the pulley and bending during paying off. The splicing protection sleeve must be selected according to the conduc...

    • TRANSMISSION LINE TOOLS INTEGRAL MANUAL HYDRAULIC CABLE CUTTER

      TRANSMISSION LINE TOOLS INTEGRAL MANUAL HYDRAUL...

      Product introduction  1.Hand operated hydraulic cutter specifically designed to cut copper, aluminium tel cables, ACSR, steel strand and having a max  overall diameter from 40 to 85mm. 2.The tool features a double speed action: a fast advancing speed for rapid approach of the blades to the cable     and a slower more powerful speed for cutting. 3.The blades are manufactured from high strength special steel, heat treated to ensure a long service life. 4.The head can b...

    • BELT DRIVE Drum WINCH DIESEL GASOLINE ENGINE Wire Rope PULLING WINCH

      BELT DRIVE Drum WINCH DIESEL GASOLINE ENGINE Wi...

      Product introduction 1. Gas engine powered winch 2. Max Pulling Force:50KN 3. Weight:190kg(No wire rope) 4. Dimension:1200x600x700mm 5. Wire rope:10mm 300M / 14mm 200m It is used for tower erection and sagging operation in line construction. It can also be used for pulling conductor or underground cable. The winches are the construction tools of erecting electric circuits of high pressure electric transmission in the sky and laying electrical cables underground. It...

    • HYDRAULIC TENSIONING STRINGING EQUIPMENT OVERHEAD LINE

      HYDRAULIC TENSIONING STRINGING EQUIPMENT OVERHE...

      Product introduction  The Hydraulic tensioning equipment is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out. Bull wheel with wear proof MC nylon lining segments. Infinitely variable tension control and constant tension conductor stringing. Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety Attached two sets of hydraulic power output interface to connect hydraulic...

    • Manual Ratchet Tightener Insulating Ribbon Insulated Tightener

      Manual Ratchet Tightener Insulating Ribbon Insu...

      Product introduction  The Insulated tightener uses non-conductive FRP insulated handle and soft corrosion-resistant and high tension woven belt to replace the steel wire rope. It is used for wire tightening during live line operation, and the voltage resistance is 15 kV (3 minutes) 1.The handle is made of glass fiber reinforced plastic insulation resin, with a withstand voltage of more than 15KV. It can be used for wire tightening, traction and lifting in live workin...