Jack Support Cable Drum Heavy Load Hydraulic Type Cable Reel Stand

Short Description:

Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use.
Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom.


Product Detail

Product Tags

Product introduction
Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use.
Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom.
Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light and durable, suitable for manual setting out.
Hydraulic Type Cable Reel Stand can be equipped with brake device. Manual braking is adopted, and friction braking is applied between the brake pad and the brake disc in the brake device.
When the Hydraulic Type Cable Reel Stand is equipped with a brake device, it is necessary to an inclined support rod on the support to prevent the Cable Reel Stand from toppling when braking.
When selecting the Hydraulic Type Cable Reel Stand, in addition to providing the weight of the cable reel, it is better to provide the outer diameter and width of the cable reel, as well as the shaft hole diameter of the cable reel. Avoid improper selection and unavailability.

High strength braided nylon rope TECHNICAL PARAMETERS

Item number

Model

Rated Load(KN)

Applicable Cable Reel

(mm)

Weight

(kg)

Diameter

Width

Hole

Diameter

21346

SI-5

50

≤ Φ2400

≤1600

Φ76-103

172

21347

SI-10

100

≤ Φ2700

≤1700

Φ120-135

230

21348

SI-10A

100

≤ Φ3400

≤1900

Φ120-135

230

21343

SI-20

200

≤ Φ4000

≤2500

Φ135-160

450

21344

SI-30

300

≤ Φ5000

≤3100

Φ160-200

600

 

jgfytu

lkjhiu

Jack Support Cable Drum Heavy Load Hydraulic Type Cable Reel Stand (7)

mmexport1585049321246
1c2e8b6f4d702b925d1397817128488
mmexport1574663981417

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Bell Mouth Type Cable drum Pulley Lockable Cable Pulling Rollers Pipe Cable Pulley

      Bell Mouth Type Cable drum Pulley Lockable Cabl...

      Product introduction  Cable Pulleys should always be used when pulling cables.When cables need to pass through pipes, use the Pipe Cable Pulley. Pulleys of corresponding sizes can be selected according to different cable diameters. The maximum cable outer diameter applicable to the Pipe Cable Pulley is 200mm. The most important feature, Pipe Cable Pulley is inserted into the cable duct, it is lockable, when you use it, please nicely palce in the tube entrance at arbi...

    • Fiberglass High Voltage Brake Pull Rod Insulated Pull Rod

      Fiberglass High Voltage Brake Pull Rod Insulate...

      Product introduction  Insulated pull rod is suitable for high voltage switch out operating. They are produced from epoxy resin, super light,high voltage, high strength. The length and sections can be made depending on your request. There are two structural forms of insulating pull rod, one is the flat mouth spiral interface structure, and the multi section insulating rod is fixed and combined through threaded connection, with high strength. The other is a telescopic ...

    • Nylon Steel Sheave Cable Ground Roller Pulley Block Grounding Wire Stringing Pulley

      Nylon Steel Sheave Cable Ground Roller Pulley B...

      Product introduction  Grounding Wire Stringing Pulley is apply to pull steel strand. Features: Good wear-resistance, no deformation, long life cycle and so on. The frame is made of steel. The sheaves materials include nylon wheel and steel sheave. Nylon sheaves are represented by N letters.The rest are steel sheave. The aluminum wheel needs to be customized. Ground wire stringing pulleys of different specifications shall be selected according to different steel stran...

    • Safety Falling Protector High Altitude Fall Arrester Anti Fall Device

      Safety Falling Protector High Altitude Fall Arr...

      Product introduction  The anti fall device, also known as the speed difference protector, is a product that plays the role of fall protection. It can quickly brake and lock the falling person or object within the limited distance, which is suitable for the fall protection of personnel working at heights or preventing the damage of the lifted workpiece and protecting the life safety of ground operators. During normal use, the safety rope will stretch freely with the h...

    • Independent Conductor Overturn Prevention Balanced Pulley Traction Guidance Head Boards

      Independent Conductor Overturn Prevention Balan...

      Product introduction  Traction Guidance Head Boards for Two Bundle Conductors are designed to avoid torsion strain accumulation during line stringing. Traction Guidance Head Boards is using with the Swivel Joint, traction guidance and anti overturning. Traction Guidance Head Boards is apply to tension stringing or mechanical traction stringing construc. The structure of the independent conductor type head boards for two bundle conductors is simple. The conductor bala...

    • Pulley for traction of large diameter power cable Nylon steel aluminum wheel cable sheave

      Pulley for traction of large diameter power cab...

      Product introduction  Nylon pulley is made of MC nylon, which is mainly made of caprolactam material by heating, melting, casting and thermoplastic molding. The product has high strength, light weight, wear resistance and corrosion resistance. The traction load of the pulley is large. The aluminum alloy pulley is integrally cast with aluminum alloy. The sheaves of Cable Stringing Roller are made of aluminum alloy or high strength MC nylon. All the sheaves are mounted...