Observe conductor Sagging measuring scope Radian observer Sag observer Zoom Sag Scope

Short Description:

Zoom Sag Scope is suitable for accurate conductor sag measurements by means of the parallelogram method and different length method.


Product Detail

Product Tags

Product introduction 

Zoom Sag Scope is suitable for accurate conductor sag measurements by means of the parallelogram method and different length method.
Equipped with a special anchoring support for steel tower.
Fix the Zoom Sag Scope on the electric tower.
Adjust the level,Keep the Zoom Sag Scope horizontal.
Adjust the lens to observe object in different distance. First loosen the tight ring, than adjust till the cross in lens is clear to be seen, and tighten the ring.
Use the key to adjust the cross angle in the lens.

Zoom Sag Scope TECHNICAL PARAMETERS

Item No.

Magnification

factor

Applicable

angle iron

Weight

kg

Remarks

22151

4

∠56-125

1.6

Angle steel on the tower

22181

/

/

0.5

Cement Pole steel Pole

22191

/

/

0.6

Angle steel on the tower

f6f734c73b2c51087ac32935dbb5933
0649fa620c1e230579106dd4f053936

  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 916mm Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block

      916mm Wheels Sheaves Bundled Wire Conductor Pul...

      Product introduction  This 916mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ916 × Φ800 × 110 (mm). Under normal circumstances,its maximum suitable conductor is ACSR720, which means that the aluminum of our conducting wire has the maximum cross section of 720 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum S...

    • Balancing Head Board Anti Twist Board OPGW Twist preventer

      Balancing Head Board Anti Twist Board OPGW Twis...

      Product introduction  Uses: for OPGW construction. If the optical cable is twisted during traction, it will be damaged. OPGW Twist preventer can prevent optical cable from twisting during traction. Two OPGW Twist preventer are used in a group. The gap ofanti OPGW Twist preventer are is 2m. Directly fixed on the OPGW. OPGW Twist preventer can pass through Pulley above Φ660mm. OPGW Twist preventer TECHNICAL PARAMETERS Item number Cable Diameter (mm) To...

    • POWER TOWER POLE ERECTION ALUMINUM ALLOY A-SHAPE GIN POLE

      POWER TOWER POLE ERECTION ALUMINUM ALLOY A-SHAP...

      Product introduction A-Shape Gin Pole is used for transmission and distribution line engineering, sling tower material, positioning pulley set use. A-Shape Gin Pole assembling power stringing tower. The specification of holding pole is divided into 250, 300, 350, 400, 500 and 600 mm2 according to the section. The required length ranges from 3-22 m. The corresponding load is 26-275KN. The main material adopts right angle aluminum titanium alloy section, rivet joint ma...

    • COME ALONG CLAMP ALUMINUM ALLOY CONDUCTOR WIRE MULTI-SEGMENT GRIPPER

      COME ALONG CLAMP ALUMINUM ALLOY CONDUCTOR WIRE ...

      Product introduction  1. The body of multi-segment type gripper is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according...

    • CHAIN TYPE HANDLE HOIST lever Hoisting Hand hoist

      CHAIN TYPE HANDLE HOIST lever Hoisting Hand hoist

      Product introduction  CHAIN TYPE HANDLE HOIST is apply to lifting machine parts, tightening steel stranded wire, aluminum stranded wire and ACSR etc in the construction. Great Quality manual hand series lifting chain hoist block is light weight, suitable for simple manual operation and has a strong safety performance and high safety of the product performance, easy to use security; specifically designed for heavy industry, 360 ° rotating hand chain guide allowed oper...

    • DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HOISTING TACKLE

      DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HO...

      Product introduction  Both side opening hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move objects for many times. Product is made of both side opening steel side plate with steel wheel. The wheel has good wear...