OEM Cable Cutter Stripper Manufacturer – Transmission Conductor Triple Aluminum Sheaves Neoprene Lined Stringing Pulley Block Aluminum Sheaves Coated with Rubber Stringing Block – Donghuan Power
OEM Cable Cutter Stripper Manufacturer – Transmission Conductor Triple Aluminum Sheaves Neoprene Lined Stringing Pulley Block Aluminum Sheaves Coated with Rubber Stringing Block – Donghuan Power Detail:
Product introduction
The aluminum sheave or the nylon sheave used as the base material, and the sheave groove is coated with rubber. Before coating, the groove surface of the aluminum sheave or the nylon sheave needs to be specially processed, Then the high temperature rubber pressing process is adopted, so that the rubber layer can be firmly adhered to the aluminum sheave or the nylon sheave.
The purpose of aluminum sheave or the nylon sheave coating with rubber is that when the conductor is pulled through the sheave groove, the surface of the conductor and the pulley groove will generate friction, and the outer surface of the conductor will be damaged to a certain extent. The rubber coating on the aluminum sheave or the nylon sheave can reduce the damage caused by this friction.
Stringing block can be divided into single sheave, three sheaves and five sheaves according to the number of sheaves. According to sheave diameter, it can be divided into (outside diameter × sheave width) of Φ308×75, Φ408×80 and Φ508×75 (mm), etc. Sheave size can be customized according to needs. The number of sheaves can also be customized.
Product description
1. Rubber coated stinging block for conductor transmission line passing
2. Any sizes of stringing block（outside diameter*root diameter*sheave width） accept to customize
3.OEM and ODM service
4.Nylon sheaves or aluminum sheaves is coated with rubber (neoprene)
Hydraulic Traction Technical Parameters
|
Item Number |
Model |
Sheaves |
Sizes |
Rated Load |
Weight |
|
10241JS |
SHSLJ308 |
3 |
308×75mm |
35KN |
28KG |
|
10199JS |
SHSLJ408 |
3 |
408×80mm |
40KN |
35KG |
|
10102JS |
SHSLJ508 |
3 |
508×75mm |
40KN |
45KG |
Product detail pictures:
Related Product Guide:
As a way to ideal meet up with client's desires, all of our operations are strictly performed in line with our motto "High Top quality, Competitive Cost, Fast Service" for OEM Cable Cutter Stripper Manufacturer – Transmission Conductor Triple Aluminum Sheaves Neoprene Lined Stringing Pulley Block Aluminum Sheaves Coated with Rubber Stringing Block – Donghuan Power , The product will supply to all over the world, such as: Singapore, Surabaya, Myanmar, With the spirit of "high quality is our company's life; good reputation is our root", we sincerely hope to cooperate with customers from at home and abroad and hope to build a good relationship with you.
By Dorothy from European - 2017.06.25 12:48
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By tobin from Armenia - 2018.09.08 17:09
Related products
-
OEM Aircraft Cable Pulley Factory – Cab...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
China wholesale Sheave Block Supplier – ...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Crane Sheave Block Factory – Diesel...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
OEM Ratchet Chain Block Manufacturers – ...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
OEM Single Pulley Block Factory – Large...
Product introduction The Stringing Pulley With Grounding Roller is used to release the induced current on the line during the setting out construction. The conductor is located between the grounding pulley and the main pulley. The conductor is in contact with the grounding pulley, and the induced current on the conductor is released through the grounding wire connected with the grounding pulley. Avoid accidental electric shock of construction personnel. The Stringing Pulley With Grounding Rol...
-
OEM Nylon Wheel Pulley Suppliers – Heav...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...