OEM Cable Pulley Wire Manufacturer – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power
OEM Cable Pulley Wire Manufacturer – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power Detail:
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
|
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
|
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
|
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
|
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
|
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
|
10 |
30 |
80±1 |
18 |
100 |
230±2 |
|
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
|
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
|
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
|
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Product detail pictures:
Related Product Guide:
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for OEM Cable Pulley Wire Manufacturer – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power , The product will supply to all over the world, such as: New Delhi, Toronto, Niger, Our company is working by the operation principle of "integrity-based, cooperation created, people oriented, win-win cooperation". We hope we can have a friendly relationship with businessman from all over the world.
By Alberta from Greenland - 2018.07.27 12:26
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Ann from Jordan - 2018.09.23 18:44
Related products
-
China wholesale Nylon Halyard Rope Factory R...
Product introduction Anti twist steel wire rope is a special textile steel wire rope made of high-strength hot-dip galvanized high-quality steel wire through special processing. It is also called non rotating steel wire rope because its cross section is hexagonal and does not twist when stressed. Compared with ordinary round strand wire rope, it has the advantages of high strength, good flexibility, corrosion prevention and rust prevention, no gold hook, not easy to knot, long service life an...
-
China wholesale Portable Manual Winch Suppliers...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
China wholesale Wire Spool Roller Suppliers ...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
China wholesale Manual Cable Stripping Tool Fac...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
OEM Single Conductor Flying Car Manufacturer &#...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Tool For Cutting Armoured Cable Manufacture...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...