OEM Cable Winching Factory – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power
OEM Cable Winching Factory – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power Detail:
Product introduction
The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out.
Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge .
The max pull for conductor–stringing operation can preset ,automatic overload protection system .
Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
With hydraulic pulling rope clamp,replacing steel rope conveniently.
With wire rope automatic winding device,automatic rope laying,loading and unloading convenience.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400
Hydraulic Traction Technical Parameters
| Item number | 07001 | 07011 | 07031 | 07041 | 07051 | 07061 | 07065 | 07071 | 07075 | |
| Model | QY-30Y | QY-40Y | QY-60Y | QY-90Y | QY-180Y | QY-220Y | QY-250Y | QY-300Y | QY-420Y | |
| Maximum pull forc (KN) |
30 | 40 | 60 | 90 | 180 | 220 | 250 | 300 | 420 | |
| Continuous pull forc (KN) |
25 | 35 | 50 | 80 | 150 | 180 | 200 | 250 | 350 | |
| Maximum pull force (KM/H) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Bottom of groovr diamere (MM) |
Φ300 | Φ400 | Φ460 | Φ520 | Φ630 | Φ760 | Φ820 | Φ960 | Φ960 | |
| Number of groovr (MM) |
7 | 7 | 7 | 7 | 9 | 10 | 10 | 10 | 11 | |
| Maximum suitable stell rope diamete (MM) |
Φ13 | Φ16 | Φ18 | Φ20 | Φ24 | Φ30 | Φ32 | Φ38 | Φ45 | |
| Maximum through connectors diamete (MM) |
Φ40 | Φ50 | Φ60 | Φ60 | Φ63 | Φ75 | Φ80 | Φ80 | Φ80 | |
| Engine power/speed (KW/RPM) |
31/ 2200 |
60/ 2000 |
77/ 2800 |
123/ 2500 |
209/ 2100 |
243/ 2100 |
261/ 2100 |
298/ 2100 |
402/ 2100 |
|
| Dimensions (M) |
3.2 x1.6×2 |
3.5 x2x2 |
3.8 x2.1×2.3 |
3.5 x2.1×2.5 |
5.5 x2.2×2.6 |
5.7 x2.3×2.6 |
5.8 x2.4×2.6 |
5.9 x2.5×2.9 |
6.1 x2.6×2.8 |
|
| Weight (KG) |
1500 | `2500 | 3000 | 4300 | 7500 | 8000 | 9000 | 11500 | 14800 | |
| matching wire rope tray | Mode | GSP 950 |
GSP 1400 |
GSP 1400 |
GSP 1400 |
GSP 1600 |
GSP 1600 |
GSP 1600 |
GSP 1900 |
GSP 1900 |
| Item No. | 07125A | 07125C | 07125C | 07125C | 07125D | 07125D | 07125D | 07125E | 07125E | |
Product detail pictures:
Related Product Guide:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for OEM Cable Winching Factory – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power , The product will supply to all over the world, such as: Madagascar, Algeria, Mexico, We care about every steps of our services, from factory selection, product development & design, price negotiation, inspection, shipping to aftermarket. We have implemented a strict and complete quality control system, which ensures that each product can meet quality requirements of customers. Besides, all of our products have been strictly inspected before shipment. Your Success, Our Glory: Our aim is to help customers realize their goals. We are making great efforts to achieve this win-win situation and sincerely welcome you to join us.
By Christine from Florida - 2018.11.06 10:04
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Meroy from Costa Rica - 2018.11.28 16:25
Related products
-
OEM Heavy Duty Wire Rope Pulley Factory –...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
OEM Large Wire Clips Manufacturers – Al...
Product introduction Nylon wheel hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move moving objects for many times. Product is made of aluminum alloy side plate with MC nylon wheel, it has light weight. Easy to carry and hang. The wheel ...
-
OEM Large Diameter Rope Pulley Factory – ...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Diesel Cable Pulling Winch Manufacturers &#...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Double Sheave Block Suppliers &...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
-
China wholesale Handle Hoist Supplier – ...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...