OEM Conducting Wire Clamp Supplier – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Sincerity, Innovation, Rigorousness, and Efficiency" may be the persistent conception of our organization for that long-term to establish jointly with customers for mutual reciprocity and mutual gain for Aluminum Cable Clips, Steel Wire Clips, Extension Cable Roller, We welcome customers all over the word to contact us for future business relationships. Our products are the best. Once Selected, Perfect Forever!
OEM Conducting Wire Clamp Supplier – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power Detail:

Product introduction

As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.

The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire.

Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.

When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.

The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.

The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.

We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.

Cable Mesh Socks Joint TECHNICAL PARAMETERS 

Item number

Model

Applicable

Cable Diameter

(mm)

Rated Load

(KN)

Weight

(kg)

21361

SWL-16

Φ12-16

10

0.8

21362

SWL-20

Φ16-20

10

0.8

21363

SWL-25

Φ20-25

15

1.0

21364

SWL-37

Φ25-37

15

1.0

21365

SWL-50

Φ37-50

15

1.0

21366`

SWL-60

Φ50-60

25

2.4

21367

SWL-80

Φ60-80

25

2.4

21368

SWL-100

Φ80-100

25

2.4

21369

SWL-120

Φ100-120

30

2.6

21370

SWL-150

Φ120-150

30

2.6

21371

WT-100

Φ88-100

100

3.5

21371A

WT-115

Φ100-115

100

3.5

21371B

WT-130

Φ115-130

100

4

21371C

WT-150

Φ130-150

100

4.5

21371D

WT-180

Φ150-180

100

5

21372

WT-185

Φ180

200

6

21373

WT-240

Φ240

300

8

21374

WT-250

Φ250

300

8

21375

WT-280

Φ280

300

9



Product detail pictures:

OEM Conducting Wire Clamp Supplier –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

OEM Conducting Wire Clamp Supplier –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

OEM Conducting Wire Clamp Supplier –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

OEM Conducting Wire Clamp Supplier –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures

OEM Conducting Wire Clamp Supplier –  Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power detail pictures


Related Product Guide:

With our leading technology also as our spirit of innovation,mutual cooperation, benefits and development, we are going to build a prosperous future jointly with your esteemed company for OEM Conducting Wire Clamp Supplier – Wire Laying Construction Wire Rope Pulling Cable traction net sleeve Cable Mesh Socks Joint – Donghuan Power , The product will supply to all over the world, such as: Porto, Sydney, Macedonia, Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
  • Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
    5 Stars By Athena from Latvia - 2018.06.18 19:26
    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Lesley from Albania - 2017.05.02 11:33
    Write your message here and send it to us

    Related products

    • OEM Three Conductor Pulley Supplier –  508mmlarge Diameter Wheels Sheaves Bundled Wire Conductor Pulley Stringing Block – Donghuan Power

      OEM Three Conductor Pulley Supplier – 5...

      Product introduction  This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances,its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector...

    • China wholesale Compact Hand Winch Factory –  Diesel Engine Gasoline Powered Winch Electric Cable Double Drum HOIST WINCH Double Drum Winch – Donghuan Power

      China wholesale Compact Hand Winch Factory R...

      Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...

    • China wholesale Hand Crane Hoist Suppliers –  Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power

      China wholesale Hand Crane Hoist Suppliers R...

      Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...

    • OEM High Voltage Cable Stripping Tools Factory –  Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power

      OEM High Voltage Cable Stripping Tools Factory ...

      Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...

    • OEM Dyno Meter Manufacturer –  One way turn Two way turn Nylon or Aluminum Turning Cable Drum Roller – Donghuan Power

      OEM Dyno Meter Manufacturer – One way t...

      Product introduction  Cable Pulleys should always be used when pulling cables.When cables need to pass through pipes, use the Pipe Cable Pulley. Pulleys of corresponding sizes can be selected according to different cable diameters. The maximum cable outer diameter applicable to the Pipe Cable Pulley is 200mm. The most important feature, Pipe Cable Pulley is inserted into the cable duct, it is lockable, when you use it, please nicely palce in the tube entrance at arbitrary angle. Common sheave...

    • OEM Manual Rope Hoist Manufacturers –  High Speed Planetary Gearbox Tugger Fast Power Cable Pulling for Lifting and Traction Gasoline Diesel Electric Powered Capstan Winch – Donghuan P...

      OEM Manual Rope Hoist Manufacturers – H...

      Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...