OEM Hand Crank Cable Winch Supplier – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power
OEM Hand Crank Cable Winch Supplier – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power Detail:
Product introduction
Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use.
Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom.
Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light and durable, suitable for manual setting out.
Hydraulic Type Cable Reel Stand can be equipped with brake device. Manual braking is adopted, and friction braking is applied between the brake pad and the brake disc in the brake device.
When the Hydraulic Type Cable Reel Stand is equipped with a brake device, it is necessary to an inclined support rod on the support to prevent the Cable Reel Stand from toppling when braking.
When selecting the Hydraulic Type Cable Reel Stand, in addition to providing the weight of the cable reel, it is better to provide the outer diameter and width of the cable reel, as well as the shaft hole diameter of the cable reel. Avoid improper selection and unavailability.
Internal Suspended Aluminum Alloy Holding Pole TECHNICAL
|
Item number |
Model |
Length Range (m) |
Section（mm） |
Main Materials （mm） |
Auxiliary Materials （mm） |
Vertical Load （KN） |
Safety Factor (K) |
Weight （kg/m） |
|
03131 |
LBNX-300A |
8-16 |
300*300 |
50*50*4 |
25*25*3 |
38-13 |
2.5 |
10.5 |
|
03141 |
LBNX-300B |
11-18 |
300*300 |
50*50*5 |
30*30*3 |
40-15 |
2.5 |
11.0 |
|
03151 |
LBNX-400 |
12-20 |
400*400 |
50*50*5 |
30*30*3 |
43-13 |
2.5 |
14.6 |
|
03511 |
LBNX-500A |
12-20 |
500*500 |
60*60*5 |
30*30*3 |
75-34 |
2.5 |
18 |
|
03515 |
LBNX-500B |
14-22 |
500*500 |
60*60*5 |
40*40*3 |
2.5 |
20 |
|
|
03521 |
LBNX-500C |
15-23 |
500*500 |
70*70*6 |
40*40*3 |
88-42 |
2.5 |
21 |
|
03525 |
LBNX-500D |
17-25 |
500*500 |
70*70*6 |
50*50*4 |
2.5 |
22 |
|
|
03531 |
LBNX-600A |
15-23 |
600*600 |
60*60*6 |
40*40*3 |
75-38 |
2.5 |
20 |
|
03535 |
LBNX-600B |
17-25 |
600*600 |
70*70*6 |
40*40*3 |
2.5 |
21 |
|
|
03541 |
LBNX-600C |
17-25 |
600*600 |
70*70*6 |
50*50*4 |
119-58 |
2.5 |
22 |
|
03545 |
LBNX-600D |
17-25 |
600*600 |
75*75*6 |
50*50*4 |
2.5 |
24 |
|
|
03601 |
BNX-300 |
10-15 |
300*300 |
50*50*5 |
30*30*3 |
35-17 |
2.5 |
33 |
|
03602 |
BNX-400 |
12-16 |
400*400 |
50*50*5 |
30*30*3 |
51-29 |
2.5 |
43 |
|
03603 |
BNX-500 |
16-24 |
500*500 |
63*63*6 |
30*30*3 |
93-41 |
2.5 |
54 |
|
03604 |
BNX-600 |
16-32 |
600*600 |
70*70*6 |
40*40*4 |
221-72 |
2.5 |
63 |
|
03605 |
BNX-700 |
20-32 |
700*700 |
80*80*6 |
40*40*4 |
294-115 |
2.5 |
75 |
Product detail pictures:
Related Product Guide:
With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and growth, we're going to build a prosperous future together with your esteemed firm for OEM Hand Crank Cable Winch Supplier – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power , The product will supply to all over the world, such as: Australia, Spain, Stuttgart, Our items have been obtained more and more recognition from foreign clients, and established long term and cooperative relationship with them. We`ll supply the best service for every customer and sincerely welcome friends to work with us and establish the mutual benefit together.
By Martin Tesch from Jordan - 2018.05.15 10:52
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Gary from Belgium - 2018.10.01 14:14
Related products
-
OEM Ball Bearing Pulley Block Manufacturers ...
Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...
-
OEM Mechanical Swivel Joints Supplier – ...
Product introduction Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tens...
-
OEM Hand Pulley Winch Suppliers – Cable...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Screw Wire Clips Manufacturer – ALU...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
-
OEM Wire Rope Locking Clamp Factory – A...
Product introduction Aluminum Alloy Conductor Grippers are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines.. The grippers is applicable to adjust sag and tension conductor during stringing. The grippers is forged from high-strength aluminum alloy, with small volume and light weight. All gripping jaws are produced with new technology to increase jaw life. The grippers are designed to be used...
-
OEM Lightweight Hand Winch Manufacturers –...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...