OEM Hand Hoist Supplier – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power
OEM Hand Hoist Supplier – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power Detail:
Product introduction
The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out.
Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge .
The max pull for conductor–stringing operation can preset ,automatic overload protection system .
Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
With hydraulic pulling rope clamp,replacing steel rope conveniently.
With wire rope automatic winding device,automatic rope laying,loading and unloading convenience.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400
Hydraulic Traction Technical Parameters
| Item number | 07001 | 07011 | 07031 | 07041 | 07051 | 07061 | 07065 | 07071 | 07075 | |
| Model | QY-30Y | QY-40Y | QY-60Y | QY-90Y | QY-180Y | QY-220Y | QY-250Y | QY-300Y | QY-420Y | |
| Maximum pull forc (KN) |
30 | 40 | 60 | 90 | 180 | 220 | 250 | 300 | 420 | |
| Continuous pull forc (KN) |
25 | 35 | 50 | 80 | 150 | 180 | 200 | 250 | 350 | |
| Maximum pull force (KM/H) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Bottom of groovr diamere (MM) |
Φ300 | Φ400 | Φ460 | Φ520 | Φ630 | Φ760 | Φ820 | Φ960 | Φ960 | |
| Number of groovr (MM) |
7 | 7 | 7 | 7 | 9 | 10 | 10 | 10 | 11 | |
| Maximum suitable stell rope diamete (MM) |
Φ13 | Φ16 | Φ18 | Φ20 | Φ24 | Φ30 | Φ32 | Φ38 | Φ45 | |
| Maximum through connectors diamete (MM) |
Φ40 | Φ50 | Φ60 | Φ60 | Φ63 | Φ75 | Φ80 | Φ80 | Φ80 | |
| Engine power/speed (KW/RPM) |
31/ 2200 |
60/ 2000 |
77/ 2800 |
123/ 2500 |
209/ 2100 |
243/ 2100 |
261/ 2100 |
298/ 2100 |
402/ 2100 |
|
| Dimensions (M) |
3.2 x1.6×2 |
3.5 x2x2 |
3.8 x2.1×2.3 |
3.5 x2.1×2.5 |
5.5 x2.2×2.6 |
5.7 x2.3×2.6 |
5.8 x2.4×2.6 |
5.9 x2.5×2.9 |
6.1 x2.6×2.8 |
|
| Weight (KG) |
1500 | `2500 | 3000 | 4300 | 7500 | 8000 | 9000 | 11500 | 14800 | |
| matching wire rope tray | Mode | GSP 950 |
GSP 1400 |
GSP 1400 |
GSP 1400 |
GSP 1600 |
GSP 1600 |
GSP 1600 |
GSP 1900 |
GSP 1900 |
| Item No. | 07125A | 07125C | 07125C | 07125C | 07125D | 07125D | 07125D | 07125E | 07125E | |
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" will be the persistent conception of our company to the long-term to establish together with customers for mutual reciprocity and mutual gain for OEM Hand Hoist Supplier – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power , The product will supply to all over the world, such as: Moscow, Yemen, Iran, Our main objectives are to provide our customers worldwide with good quality, competitive price, satisfied delivery and excellent services. Customer satisfaction is our main goal. We welcome you to visit our showroom and office. We are looking forward to establish business relation with you.
By Griselda from South Africa - 2018.02.21 12:14
The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
By Claire from Afghanistan - 2017.03.28 12:22
Related products
-
OEM Nylon Halyard Rope Factory – Custom...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
OEM Cable Pulley Wire Manufacturer – Ca...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Polyamide Cordage Suppliers – Pulli...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Wire Holder Clamp Supplier – Wire L...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Wire Rope Pulling Hoist Supplier – ...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
-
China wholesale Heavy Duty Anchor Stakes Suppli...
Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...