OEM Hand Winch Handle Suppliers – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power
OEM Hand Winch Handle Suppliers – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power Detail:
Product introduction
Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use.
Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom.
Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light and durable, suitable for manual setting out.
Hydraulic Type Cable Reel Stand can be equipped with brake device. Manual braking is adopted, and friction braking is applied between the brake pad and the brake disc in the brake device.
When the Hydraulic Type Cable Reel Stand is equipped with a brake device, it is necessary to an inclined support rod on the support to prevent the Cable Reel Stand from toppling when braking.
When selecting the Hydraulic Type Cable Reel Stand, in addition to providing the weight of the cable reel, it is better to provide the outer diameter and width of the cable reel, as well as the shaft hole diameter of the cable reel. Avoid improper selection and unavailability.
Internal Suspended Aluminum Alloy Holding Pole TECHNICAL
|
Item number |
Model |
Length Range (m) |
Section（mm） |
Main Materials （mm） |
Auxiliary Materials （mm） |
Vertical Load （KN） |
Safety Factor (K) |
Weight （kg/m） |
|
03131 |
LBNX-300A |
8-16 |
300*300 |
50*50*4 |
25*25*3 |
38-13 |
2.5 |
10.5 |
|
03141 |
LBNX-300B |
11-18 |
300*300 |
50*50*5 |
30*30*3 |
40-15 |
2.5 |
11.0 |
|
03151 |
LBNX-400 |
12-20 |
400*400 |
50*50*5 |
30*30*3 |
43-13 |
2.5 |
14.6 |
|
03511 |
LBNX-500A |
12-20 |
500*500 |
60*60*5 |
30*30*3 |
75-34 |
2.5 |
18 |
|
03515 |
LBNX-500B |
14-22 |
500*500 |
60*60*5 |
40*40*3 |
2.5 |
20 |
|
|
03521 |
LBNX-500C |
15-23 |
500*500 |
70*70*6 |
40*40*3 |
88-42 |
2.5 |
21 |
|
03525 |
LBNX-500D |
17-25 |
500*500 |
70*70*6 |
50*50*4 |
2.5 |
22 |
|
|
03531 |
LBNX-600A |
15-23 |
600*600 |
60*60*6 |
40*40*3 |
75-38 |
2.5 |
20 |
|
03535 |
LBNX-600B |
17-25 |
600*600 |
70*70*6 |
40*40*3 |
2.5 |
21 |
|
|
03541 |
LBNX-600C |
17-25 |
600*600 |
70*70*6 |
50*50*4 |
119-58 |
2.5 |
22 |
|
03545 |
LBNX-600D |
17-25 |
600*600 |
75*75*6 |
50*50*4 |
2.5 |
24 |
|
|
03601 |
BNX-300 |
10-15 |
300*300 |
50*50*5 |
30*30*3 |
35-17 |
2.5 |
33 |
|
03602 |
BNX-400 |
12-16 |
400*400 |
50*50*5 |
30*30*3 |
51-29 |
2.5 |
43 |
|
03603 |
BNX-500 |
16-24 |
500*500 |
63*63*6 |
30*30*3 |
93-41 |
2.5 |
54 |
|
03604 |
BNX-600 |
16-32 |
600*600 |
70*70*6 |
40*40*4 |
221-72 |
2.5 |
63 |
|
03605 |
BNX-700 |
20-32 |
700*700 |
80*80*6 |
40*40*4 |
294-115 |
2.5 |
75 |
Product detail pictures:
Related Product Guide:
We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for OEM Hand Winch Handle Suppliers – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power , The product will supply to all over the world, such as: Ghana, Saudi Arabia, Wellington, We are trying our best to make more customers happy and satisfied. we sincerely hope to establish a good long-term business relationship with your esteemed company thought this opportunity,based on equal, mutual beneficial and win win business from now till the future.
By Aurora from Boston - 2017.03.07 13:42
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Andrea from Costa Rica - 2017.01.11 17:15
Related products
-
OEM Electrical Cable Roller Factory – C...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Five Pulley Block Factory ̵...
Product introduction In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying. The guide rope enters the pulley groove through the guide rope guide arm, eccentric rotating door and other mechanisms in the Aerial Helicopter Stringing Pulley. The Aeria...
-
OEM Vertical Hand Winch Suppliers – Hig...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Small Cable Winch Puller Suppli...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
OEM Cable Crimping Machine Manufacturer –...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Geared Hand Winch Factory ̵...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...