OEM Hydraulic Tensioner Factory – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power
OEM Hydraulic Tensioner Factory – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power Detail:
Product introduction
The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out.
Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge .
The max pull for conductor–stringing operation can preset ,automatic overload protection system .
Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety .
With hydraulic pulling rope clamp,replacing steel rope conveniently.
With wire rope automatic winding device,automatic rope laying,loading and unloading convenience.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400
Hydraulic Traction Technical Parameters
| Item number | 07001 | 07011 | 07031 | 07041 | 07051 | 07061 | 07065 | 07071 | 07075 | |
| Model | QY-30Y | QY-40Y | QY-60Y | QY-90Y | QY-180Y | QY-220Y | QY-250Y | QY-300Y | QY-420Y | |
| Maximum pull forc (KN) |
30 | 40 | 60 | 90 | 180 | 220 | 250 | 300 | 420 | |
| Continuous pull forc (KN) |
25 | 35 | 50 | 80 | 150 | 180 | 200 | 250 | 350 | |
| Maximum pull force (KM/H) | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
| Bottom of groovr diamere (MM) |
Φ300 | Φ400 | Φ460 | Φ520 | Φ630 | Φ760 | Φ820 | Φ960 | Φ960 | |
| Number of groovr (MM) |
7 | 7 | 7 | 7 | 9 | 10 | 10 | 10 | 11 | |
| Maximum suitable stell rope diamete (MM) |
Φ13 | Φ16 | Φ18 | Φ20 | Φ24 | Φ30 | Φ32 | Φ38 | Φ45 | |
| Maximum through connectors diamete (MM) |
Φ40 | Φ50 | Φ60 | Φ60 | Φ63 | Φ75 | Φ80 | Φ80 | Φ80 | |
| Engine power/speed (KW/RPM) |
31/ 2200 |
60/ 2000 |
77/ 2800 |
123/ 2500 |
209/ 2100 |
243/ 2100 |
261/ 2100 |
298/ 2100 |
402/ 2100 |
|
| Dimensions (M) |
3.2 x1.6×2 |
3.5 x2x2 |
3.8 x2.1×2.3 |
3.5 x2.1×2.5 |
5.5 x2.2×2.6 |
5.7 x2.3×2.6 |
5.8 x2.4×2.6 |
5.9 x2.5×2.9 |
6.1 x2.6×2.8 |
|
| Weight (KG) |
1500 | `2500 | 3000 | 4300 | 7500 | 8000 | 9000 | 11500 | 14800 | |
| matching wire rope tray | Mode | GSP 950 |
GSP 1400 |
GSP 1400 |
GSP 1400 |
GSP 1600 |
GSP 1600 |
GSP 1600 |
GSP 1900 |
GSP 1900 |
| Item No. | 07125A | 07125C | 07125C | 07125C | 07125D | 07125D | 07125D | 07125E | 07125E | |
Product detail pictures:
Related Product Guide:
Our corporation insists all along the quality policy of "product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" plus the consistent purpose of "reputation very first, purchaser first" for OEM Hydraulic Tensioner Factory – Hydraulic Traction Stringing Equipment for Overhead Transmission Line Construction Hydraulic Traction Equipment – Donghuan Power , The product will supply to all over the world, such as: Turkmenistan, Florence, Puerto Rico, Should any of these items be of interest to you, please let us know. We'll be satisfied to give you a quotation upon receipt of one's detailed specifications. We have our personal experienced R&D enginners to meet any of one's requriements, We appear forward to receiving your enquires soon'and hope to have the opportunity to work together with you in the future. Welcome to check out our company.
By Maria from Philippines - 2017.09.28 18:29
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Julia from Morocco - 2017.05.31 13:26
Related products
-
China wholesale Big Cable Cutters Manufacturer ...
Product introduction This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances，its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector...
-
China wholesale Conductor Stringing Blocks Supp...
Product introduction Anti twist steel wire rope is a special textile steel wire rope made of high-strength hot-dip galvanized high-quality steel wire through special processing. It is also called non rotating steel wire rope because its cross section is hexagonal and does not twist when stressed. Compared with ordinary round strand wire rope, it has the advantages of high strength, good flexibility, corrosion prevention and rust prevention, no gold hook, not easy to knot, long service life an...
-
OEM Heavy Duty Reel Stands Manufacturer –...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
China wholesale Insulated Wire Clamps Supplier ...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Pulling Hoist Factory – Hydraulic T...
Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...
-
China wholesale Small Hydraulic Compressor Manu...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...