OEM Large Cable Reel Stands Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power
OEM Large Cable Reel Stands Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power Detail:
Product introduction
Cable rollers should always be used when pulling cables. Straight cable runs are pulled in using straight cable rollers suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using straight cable rollers suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
According to the ground environment and usage habits, the cable roller has three structures. Respectively: casting aluminum structure, steel plate structure and steel pipe structure. Steel pipe structures are also divided into simple and reinforced structures
Common cable pulley specifications include outer diameter 120mm* wheel width 130mm, outer diameter 140mm* wheel width 160mm, outer diameter 120mm* wheel width 200mm and outer diameter 140mm* wheel width 210mm, etc.
Nylon sheaves are represented by N letters.The rest are aluminum sheaves. The steel wheel needs to be customized.
Ground Cable Roller Technical Parameters
|
Item number |
Model |
Applicable Cabe（MM） |
Rated load (kN) |
Carrier Structure |
Weight (kg) |
|
21171 |
SHL1 |
≤ Φ150 |
5 |
Casting Aluminum |
5.4 |
|
21172 |
SHL1N |
5 |
3.6 |
||
|
21181 |
SHL1B |
≤ Φ150 |
5 |
Steel Plate |
5.5 |
|
21182 |
SHL1BN |
5 |
3.7 |
||
|
21183 |
SHL2BN |
≤ Φ160 |
5 |
5.5 |
|
|
21184 |
SHL3BN |
≤ Φ200 |
5 |
8.0 |
|
|
21191 |
SHL1G |
≤ Φ150 |
5 |
Steel Pipe |
5.1 |
|
21192 |
SHL1GN |
5 |
3.3 |
||
|
21193 |
SHL2GN |
≤ Φ160 |
5 |
6.5 |
|
|
21194 |
SHL3GN |
≤ Φ200 |
5 |
8.5 |
Product detail pictures:
Related Product Guide:
Our products are greatly recognized and trustworthy by users and will fulfill continually shifting economic and social requires for OEM Large Cable Reel Stands Manufacturer – Power Line Ground Cable Roller Nylon Or Aluminum Or Steel Sheave Cable Pulling Pulley – Donghuan Power , The product will supply to all over the world, such as: Auckland, Montreal, Las Vegas, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.
By Princess from Pakistan - 2018.11.28 16:25
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Dinah from Swaziland - 2017.12.02 14:11
Related products
-
OEM Hydraulic Pipe Crimping Machine Suppliers &...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Chain Hoist Block Factory ̵...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
China wholesale Big Haul Hand Winch Factory ...
Product introduction Personal protective equipment to prevent workers from falling or hang them safely after falling. According to different conditions of use, it can be divided into 1. Safety belt for fence work A safety belt used to bind the human body near the fixed structure by ropes or belts around the fixed structure so that the operator’s hands can perform other operations. 2. Fall arrest harness The safety belt used to hang the operators in case of falling of high place operati...
-
OEM Cable Cutters And Crimpers Factory – ...
Product introduction Aluminum Alloy Conductor Grippers are a commonly used wire holding tool in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines.. The grippers is applicable to adjust sag and tension conductor during stringing. The grippers is forged from high-strength aluminum alloy, with small volume and light weight. All gripping jaws are produced with new technology to increase jaw life. The grippers are designed to be used...
-
China wholesale Pulley Tackle And Hoists Manufa...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Industrial Nylon Rope Manufacturer – ...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...