OEM Multi Pulley Block Suppliers – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power
OEM Multi Pulley Block Suppliers – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power Detail:
Product introduction
Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use.
Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom.
Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light and durable, suitable for manual setting out.
Hydraulic Type Cable Reel Stand can be equipped with brake device. Manual braking is adopted, and friction braking is applied between the brake pad and the brake disc in the brake device.
When the Hydraulic Type Cable Reel Stand is equipped with a brake device, it is necessary to an inclined support rod on the support to prevent the Cable Reel Stand from toppling when braking.
When selecting the Hydraulic Type Cable Reel Stand, in addition to providing the weight of the cable reel, it is better to provide the outer diameter and width of the cable reel, as well as the shaft hole diameter of the cable reel. Avoid improper selection and unavailability.
Internal Suspended Aluminum Alloy Holding Pole TECHNICAL
|
Item number |
Model |
Length Range (m) |
Section（mm） |
Main Materials （mm） |
Auxiliary Materials （mm） |
Vertical Load （KN） |
Safety Factor (K) |
Weight （kg/m） |
|
03131 |
LBNX-300A |
8-16 |
300*300 |
50*50*4 |
25*25*3 |
38-13 |
2.5 |
10.5 |
|
03141 |
LBNX-300B |
11-18 |
300*300 |
50*50*5 |
30*30*3 |
40-15 |
2.5 |
11.0 |
|
03151 |
LBNX-400 |
12-20 |
400*400 |
50*50*5 |
30*30*3 |
43-13 |
2.5 |
14.6 |
|
03511 |
LBNX-500A |
12-20 |
500*500 |
60*60*5 |
30*30*3 |
75-34 |
2.5 |
18 |
|
03515 |
LBNX-500B |
14-22 |
500*500 |
60*60*5 |
40*40*3 |
2.5 |
20 |
|
|
03521 |
LBNX-500C |
15-23 |
500*500 |
70*70*6 |
40*40*3 |
88-42 |
2.5 |
21 |
|
03525 |
LBNX-500D |
17-25 |
500*500 |
70*70*6 |
50*50*4 |
2.5 |
22 |
|
|
03531 |
LBNX-600A |
15-23 |
600*600 |
60*60*6 |
40*40*3 |
75-38 |
2.5 |
20 |
|
03535 |
LBNX-600B |
17-25 |
600*600 |
70*70*6 |
40*40*3 |
2.5 |
21 |
|
|
03541 |
LBNX-600C |
17-25 |
600*600 |
70*70*6 |
50*50*4 |
119-58 |
2.5 |
22 |
|
03545 |
LBNX-600D |
17-25 |
600*600 |
75*75*6 |
50*50*4 |
2.5 |
24 |
|
|
03601 |
BNX-300 |
10-15 |
300*300 |
50*50*5 |
30*30*3 |
35-17 |
2.5 |
33 |
|
03602 |
BNX-400 |
12-16 |
400*400 |
50*50*5 |
30*30*3 |
51-29 |
2.5 |
43 |
|
03603 |
BNX-500 |
16-24 |
500*500 |
63*63*6 |
30*30*3 |
93-41 |
2.5 |
54 |
|
03604 |
BNX-600 |
16-32 |
600*600 |
70*70*6 |
40*40*4 |
221-72 |
2.5 |
63 |
|
03605 |
BNX-700 |
20-32 |
700*700 |
80*80*6 |
40*40*4 |
294-115 |
2.5 |
75 |
Product detail pictures:
Related Product Guide:
We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for OEM Multi Pulley Block Suppliers – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power , The product will supply to all over the world, such as: Munich, Greenland, Lithuania, we've got all day online sales to make sure the pre-sale and after-sale service in time. With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Astrid from Malawi - 2018.07.26 16:51
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By King from Malta - 2017.06.19 13:51
Related products
-
China wholesale Wire Mesh Clamps Manufacturers ...
Product introduction 1. The body is forging of high strength aluminum alloy with light weight and no damage to conductor. 2. Use multi-segment type bolts clamp structure, so the traction load is large. Not to slip line and hurt the line. Need to specify when ordering diameter and conductor models. The groove for wire clamping shall be processed according to the wire diameter. Select the number of slice that make up the product according to the traction load. 3. Apply to large cross-section c...
-
China wholesale Cable Sripper Manufacturer R...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Electrical Cable Cutters Hand T...
Product introduction In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying. The guide rope enters the pulley groove through the guide rope guide arm, eccentric rotating door and other mechanisms in the Aerial Helicopter Stringing Pulley. The Aeria...
-
China wholesale Hydraulic Wire Puller Supplier ...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
China wholesale Hand Winch Puller Factory ̵...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Hand Chain Winch Manufacturer – Tow...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...