OEM Nylon Wheel Pulley Suppliers – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power
OEM Nylon Wheel Pulley Suppliers – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power Detail:
Product introduction
Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering.
The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.).
The specifications and models of hydraulic crimping pliers range from 60 tons to 300 tons, and customers can choose the appropriate model according to their needs. The selection principle of hydraulic crimping pliers is that large hydraulic crimping pliers can be used to crimp small-size crimping pipes, but small hydraulic crimping pliers cannot be used to crimp large-size crimping pipes, otherwise the crimping will be unstable.
The crimping die is selected according to the model of the hydraulic crimping pliers and the specification of the crimping pipe. Neither big nor small.
Hydraulic crimping pliers is suitable for the crimping of large-size crimping pipes. For power cable conductors, oil pressure copper and aluminum terminals and connecting tubes.
Tightly press on the 10kv-500kv high-voltage cable bushing, clamp the end, use hexagonal mold, crimp tightly, conduct electricity well, and it is not easy to fall off and conduct heat well.
Hydraulic Crimping Pliers Technical Parameters
|
Item number |
16103 |
16103A |
16104 |
16105 |
16106 |
|
Model |
YJD-600 |
YJD-1000 |
YJD-1250 |
YJD-2000 |
YJD-3000 |
|
Crimping force |
60T |
100T |
125T |
200T |
300T |
|
Crimping range |
14-55mm |
14-76mm |
14-76mm |
14-90mm |
14-100mm |
|
Crimping type |
hexagon crimping |
hexagon crimping |
|||
|
Stroke |
24mm |
24mm |
35mm |
35mm |
|
|
Heigth |
approx.370mm |
approx.480mm |
|||
|
Weight （KG） |
approx.N.W20KG G.W30KG |
approx.N.W30KG G.W40KG |
approx.N.W50KG G.W60KG |
approx.N.W85KG G.W95KG |
approx.N.W120KG G.W130KG |
|
Package |
wooden case |
wooden case |
|||
Product detail pictures:
Related Product Guide:
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for OEM Nylon Wheel Pulley Suppliers – Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power , The product will supply to all over the world, such as: Ottawa, Chile, venezuela, Our company regards "reasonable prices, high quality,efficient production time and good after-sales service" as our tenet. We hope to cooperate with more customers for mutual development and benefits in future. Welcome to contact us.
By Eudora from panama - 2017.06.25 12:48
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Jeff Wolfe from St. Petersburg - 2018.09.21 11:44
Related products
-
China wholesale Chain Hoist Motor Manufacturers...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
China wholesale Synthetic Rope Pulley Manufactu...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The model jjcs-50t double dru...
-
OEM Winch Rope Pulley Supplier – Cable ...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Cable Wellhead Pulley Supplier – Pi...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protecto...
-
China wholesale Cable Striper Factory – ...
Product introduction This 822mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ822 × Φ710 × 110 (mm). Under normal circumstances，its maximum suitable conductor is ACSR630, which means that the aluminum of our conducting wire has the maximum cross section of 630 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is...
-
OEM Pulley Block With Swivel Hook Suppliers ...
Product introduction This 822mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ822 × Φ710 × 110 (mm). Under normal circumstances，its maximum suitable conductor is ACSR630, which means that the aluminum of our conducting wire has the maximum cross section of 630 square millimeters. The maximum diameter through which the sheave passes is 85mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector is...