OEM Ratchet Lever Hoist Manufacturers – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power
OEM Ratchet Lever Hoist Manufacturers – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power Detail:
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
|
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
|
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
|
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
|
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
|
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
|
10 |
30 |
80±1 |
18 |
100 |
230±2 |
|
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
|
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
|
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
|
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Product detail pictures:
Related Product Guide:
Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for OEM Ratchet Lever Hoist Manufacturers – Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power , The product will supply to all over the world, such as: Bolivia, Peru, Vancouver, Being the top solutions of our factory, our solutions series have been tested and won us experienced authority certifications. For additional parameters and item list details, be sure to click the button to acquire additional nformation.
By Victor Yanushkevich from Muscat - 2018.06.28 19:27
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Marcia from Bhutan - 2018.06.05 13:10
Related products
-
China wholesale Rope Guide Pulley Manufacturers...
Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...
-
China wholesale Hydraulic Wire Tensioner Manufa...
Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...
-
OEM Earth Wire Clamp Supplier – Wire La...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Large Hand Winch Factory – High Spe...
Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...
-
China wholesale Swivel Pulley Factory – ...
Product introduction This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances，its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum Splicing Sleeve Protector...
-
China wholesale Manual Wire Rope Winch Factory ...
Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...