OEM Ratchet Tensioner Supplier – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Recovery Pulley Block, Sheave Block, Steel Cable Clips, We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business.
OEM Ratchet Tensioner Supplier – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power Detail:

Product introduction 
The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out.
Bull wheel with wear proof MC nylon lining segments.
Infinitely variable tension control and constant tension conductor stringing.
Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety
Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400 

Hydraulic TENSIONING TECHNICAL PARAMETERS

Item number

07212

07155

07171

07181

07192

07197

Model

SA-YZM7.5

SA-YZ30A

SA-YZ40A

SA-YZ2x35

SA-YZ2x40B

SA-YZ2x55

Maximum Tension(KN)

7.5

30

40

2×35/1×70

2×40/1×80

2×55/1×110

Continuous Tension(KN)

7.5

25

35

2×30/1×60

2×35/1×70

2×50/1×100

Maximum speed(Km/h)

40m/min

5

5

5

5

5

Bottom of groovr diamere(mm)

Φ1100

Φ1200

Φ1200

Φ1200

Φ1500

Φ1600

Number of groovr

/

5

5

2×5

2×5

2×5

Maximum pull-back(KN)

/

20

40

2×30/1X60

2×40/1X80

2×50/1X100

Maximum speed back

(Km/h)

/

/

3

2×2.1

2×1.5

2×2.1

Maximum suitable

conductor diameter(mm)

/

Φ32

Φ32

Φ32

Φ40

Φ42.5

Engine power/speed

(KW/RPM)

/

11/2200

37/2800

51/2500

51/2500

54/2500

Dimensions(m)

2.3×1.2×1.6

3.6×1.8×2.4

3.4×1.8×2.4

4.4×2.1×2.6

4.5×2.2×2.8

5.0×2.3×2.7

Weight(kg)

450

1700

2800

4000

4850

7500

Item number

7198

7199

7201

7208

7223

7228

Model

SA-YZ2x70

SA-YZ2x80

SA-YZ2x90

SA-YZ4x50

SA-YQZ40D

SSA-YQZ60

Maximum Tension(KN)

2×70/1×140

2×80/1×160

2×90/1×180

4×50/2×100

40

60

Continuous Tension(KN)

2×65/1×130

2×70/1×140

2×80/1×160

4×45/2×90

35

35

Maximum speed(Km/h)

5

5

5

5

5

5

Bottom of groovr diamere(mm)

Φ1700

Φ1700

Φ1700

Φ1600

Φ1200

Φ150

Number of groovr

2×5

2×5

2×6

4×5

5

6

Maximum pull-back(KN)

2×63/1X126

2×63/1X126

2×90/1X180

4×50/2X100

40

60

Maximum speed back

(Km/h)

2×1.6

2×1.6

2×1.7

4×1

5

5

Maximum suitable

conductor diameter(mm)

Φ45

Φ45

Φ48.8

Φ42.5

Φ32

Φ40

Engine power/speed

(KW/RPM)

82.5/2500

82.5/2500

82.5/2500

82.5/2500

851/2500

82.5/2000

Dimensions(m)

5.3×2.3×2.9

5.3×2.3×2.9

5.3×2.3×2.9

5.3×2.3×2.9

4.2×1.8×2.4

5.5×1.9×2.4

Weight(kg)

8500

8500

10500

12000

3600

4800


Product detail pictures:

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Ratchet Tensioner Supplier –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures


Related Product Guide:

"Based on domestic market and expand overseas business" is our improvement strategy for OEM Ratchet Tensioner Supplier – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power , The product will supply to all over the world, such as: Sao Paulo, Nairobi, Cyprus, Please really feel free to send us your requirements and we'll respond to you asap. We have got a professional engineering group to serve for your just about every detailed needs. Cost-free samples could be sent for you personally to understand much more information. In an effort to meet your requires, please really feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd items. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is actually our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
  • In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
    5 Stars By Kevin Ellyson from Sri Lanka - 2018.06.28 19:27
    The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Chris from Lesotho - 2018.06.21 17:11
    Write your message here and send it to us

    Related products

    • OEM Hand Winch For Wire Rope Factory –  High Speed Planetary Gearbox Tugger Fast Power Cable Pulling for Lifting and Traction Gasoline Diesel Electric Powered Capstan Winch – Donghuan ...

      OEM Hand Winch For Wire Rope Factory – ...

      Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...

    • OEM Chain Block Manufacturers –  High Speed Planetary Gearbox Tugger Fast Power Cable Pulling for Lifting and Traction Gasoline Diesel Electric Powered Capstan Winch – Donghuan Power

      OEM Chain Block Manufacturers – High Sp...

      Product introduction The Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. According to the power adopted by the winch, it can b...

    • OEM Wire Cutting Scissors Manufacturer –  Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power

      OEM Wire Cutting Scissors Manufacturer – ...

      Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...

    • OEM Hand Crank Capstan Winch Manufacturers –  Cable Pulling Pulley Casting Steel Wheel Sheave Hook Type Hoisting Lifting Block For Construction Hoisting Tackle – Donghuan Power

      OEM Hand Crank Capstan Winch Manufacturers R...

      Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...

    • China wholesale Hydraulic Pipe Crimper Manufacturer –  Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power

      China wholesale Hydraulic Pipe Crimper Manufact...

      Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...

    • OEM Small Cable Reel Stand Supplier –  Jack Support Cable Drum Heavy Load Hydraulic Type Cable Reel Stand – Donghuan Power

      OEM Small Cable Reel Stand Supplier – J...

      Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...