OEM Ratcheting Hand Held Cable Cutters Manufacturer – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power
OEM Ratcheting Hand Held Cable Cutters Manufacturer – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power Detail:
Product introduction
Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use.
Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom.
Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light and durable, suitable for manual setting out.
Hydraulic Type Cable Reel Stand can be equipped with brake device. Manual braking is adopted, and friction braking is applied between the brake pad and the brake disc in the brake device.
When the Hydraulic Type Cable Reel Stand is equipped with a brake device, it is necessary to an inclined support rod on the support to prevent the Cable Reel Stand from toppling when braking.
When selecting the Hydraulic Type Cable Reel Stand, in addition to providing the weight of the cable reel, it is better to provide the outer diameter and width of the cable reel, as well as the shaft hole diameter of the cable reel. Avoid improper selection and unavailability.
Internal Suspended Aluminum Alloy Holding Pole TECHNICAL
|
Item number |
Model |
Length Range (m) |
Section（mm） |
Main Materials （mm） |
Auxiliary Materials （mm） |
Vertical Load （KN） |
Safety Factor (K) |
Weight （kg/m） |
|
03131 |
LBNX-300A |
8-16 |
300*300 |
50*50*4 |
25*25*3 |
38-13 |
2.5 |
10.5 |
|
03141 |
LBNX-300B |
11-18 |
300*300 |
50*50*5 |
30*30*3 |
40-15 |
2.5 |
11.0 |
|
03151 |
LBNX-400 |
12-20 |
400*400 |
50*50*5 |
30*30*3 |
43-13 |
2.5 |
14.6 |
|
03511 |
LBNX-500A |
12-20 |
500*500 |
60*60*5 |
30*30*3 |
75-34 |
2.5 |
18 |
|
03515 |
LBNX-500B |
14-22 |
500*500 |
60*60*5 |
40*40*3 |
2.5 |
20 |
|
|
03521 |
LBNX-500C |
15-23 |
500*500 |
70*70*6 |
40*40*3 |
88-42 |
2.5 |
21 |
|
03525 |
LBNX-500D |
17-25 |
500*500 |
70*70*6 |
50*50*4 |
2.5 |
22 |
|
|
03531 |
LBNX-600A |
15-23 |
600*600 |
60*60*6 |
40*40*3 |
75-38 |
2.5 |
20 |
|
03535 |
LBNX-600B |
17-25 |
600*600 |
70*70*6 |
40*40*3 |
2.5 |
21 |
|
|
03541 |
LBNX-600C |
17-25 |
600*600 |
70*70*6 |
50*50*4 |
119-58 |
2.5 |
22 |
|
03545 |
LBNX-600D |
17-25 |
600*600 |
75*75*6 |
50*50*4 |
2.5 |
24 |
|
|
03601 |
BNX-300 |
10-15 |
300*300 |
50*50*5 |
30*30*3 |
35-17 |
2.5 |
33 |
|
03602 |
BNX-400 |
12-16 |
400*400 |
50*50*5 |
30*30*3 |
51-29 |
2.5 |
43 |
|
03603 |
BNX-500 |
16-24 |
500*500 |
63*63*6 |
30*30*3 |
93-41 |
2.5 |
54 |
|
03604 |
BNX-600 |
16-32 |
600*600 |
70*70*6 |
40*40*4 |
221-72 |
2.5 |
63 |
|
03605 |
BNX-700 |
20-32 |
700*700 |
80*80*6 |
40*40*4 |
294-115 |
2.5 |
75 |
Product detail pictures:
Related Product Guide:
Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for OEM Ratcheting Hand Held Cable Cutters Manufacturer – Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power , The product will supply to all over the world, such as: Vietnam, Mombasa, Kuwait, We've got won a good reputation among overseas and domestic clients. Adhering to the management tenet of "credit oriented, customer first, high efficiency and mature services", we warmly welcome friends from all walks of life to cooperate with us.
By Amber from Kuwait - 2017.11.29 11:09
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Dinah from Moscow - 2017.08.28 16:02
Related products
-
OEM Overhead Cable Conveyor Supplier – ...
Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...
-
OEM Portable Manual Winch Factory – Cab...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...
-
OEM Hand Gear Winch Suppliers – Hydraul...
Product introduction The product is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydraulic pulling rope clamp,replacing ste...
-
OEM Wire Rope Cable Clamp Manufacturer – ...
Product introduction As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip. The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment. When paying off in the air, the Mesh Socks...
-
OEM Cable Reel Jacks Factory – Model SL...
Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...
-
OEM Triple Sheave Pulley Block Manufacturers &#...
Product introduction The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation. The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction s...