OEM Small Manual Winch Factory – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for OPGW Gripper, Double Sheave Rope Pulley, Pulley Block With Swivel Hook, We will make greater efforts to help domestic and international buyers, and create the mutual benefit and win-win partnership between us. we are eagerly waiting for your sincerely cooperation.
OEM Small Manual Winch Factory – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power Detail:

Product introduction 
The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out.
Bull wheel with wear proof MC nylon lining segments.
Infinitely variable tension control and constant tension conductor stringing.
Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety
Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand.
Hydraulic Traction with various traction loads ranging from 3 tons to 42 tons have a complete range.
Engine : Cummins water cooled diesel engine.
Main variable pump and main motor :Rexroth (BOSCH)
Reducer :Rexroth (BOSCH)
Main hydraulic valve : Rexroth (BOSCH)
Matched reel:GSP1100-1400 

Hydraulic TENSIONING TECHNICAL PARAMETERS

Item number

07212

07155

07171

07181

07192

07197

Model

SA-YZM7.5

SA-YZ30A

SA-YZ40A

SA-YZ2x35

SA-YZ2x40B

SA-YZ2x55

Maximum Tension(KN)

7.5

30

40

2×35/1×70

2×40/1×80

2×55/1×110

Continuous Tension(KN)

7.5

25

35

2×30/1×60

2×35/1×70

2×50/1×100

Maximum speed(Km/h)

40m/min

5

5

5

5

5

Bottom of groovr diamere(mm)

Φ1100

Φ1200

Φ1200

Φ1200

Φ1500

Φ1600

Number of groovr

/

5

5

2×5

2×5

2×5

Maximum pull-back(KN)

/

20

40

2×30/1X60

2×40/1X80

2×50/1X100

Maximum speed back

(Km/h)

/

/

3

2×2.1

2×1.5

2×2.1

Maximum suitable

conductor diameter(mm)

/

Φ32

Φ32

Φ32

Φ40

Φ42.5

Engine power/speed

(KW/RPM)

/

11/2200

37/2800

51/2500

51/2500

54/2500

Dimensions(m)

2.3×1.2×1.6

3.6×1.8×2.4

3.4×1.8×2.4

4.4×2.1×2.6

4.5×2.2×2.8

5.0×2.3×2.7

Weight(kg)

450

1700

2800

4000

4850

7500

Item number

7198

7199

7201

7208

7223

7228

Model

SA-YZ2x70

SA-YZ2x80

SA-YZ2x90

SA-YZ4x50

SA-YQZ40D

SSA-YQZ60

Maximum Tension(KN)

2×70/1×140

2×80/1×160

2×90/1×180

4×50/2×100

40

60

Continuous Tension(KN)

2×65/1×130

2×70/1×140

2×80/1×160

4×45/2×90

35

35

Maximum speed(Km/h)

5

5

5

5

5

5

Bottom of groovr diamere(mm)

Φ1700

Φ1700

Φ1700

Φ1600

Φ1200

Φ150

Number of groovr

2×5

2×5

2×6

4×5

5

6

Maximum pull-back(KN)

2×63/1X126

2×63/1X126

2×90/1X180

4×50/2X100

40

60

Maximum speed back

(Km/h)

2×1.6

2×1.6

2×1.7

4×1

5

5

Maximum suitable

conductor diameter(mm)

Φ45

Φ45

Φ48.8

Φ42.5

Φ32

Φ40

Engine power/speed

(KW/RPM)

82.5/2500

82.5/2500

82.5/2500

82.5/2500

851/2500

82.5/2000

Dimensions(m)

5.3×2.3×2.9

5.3×2.3×2.9

5.3×2.3×2.9

5.3×2.3×2.9

4.2×1.8×2.4

5.5×1.9×2.4

Weight(kg)

8500

8500

10500

12000

3600

4800


Product detail pictures:

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures

OEM Small Manual Winch Factory –  TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power detail pictures


Related Product Guide:

We not only will try our best to offer excellent services to every customer, but also are ready to receive any suggestion offered by our customers for OEM Small Manual Winch Factory – TRANSMISSION LINE HYDRAULIC TENSIONING STRINGING EQUIPMENT FOR OVERHEAD TRANS MISSION LINE CONSTRUCTION – Donghuan Power , The product will supply to all over the world, such as: Norwegian, luzern, Iraq, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
  • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Juliet from Guatemala - 2018.06.19 10:42
    The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
    5 Stars By Delia Pesina from Mauritius - 2018.06.18 17:25
    Write your message here and send it to us

    Related products

    • China wholesale Cablecutters Factory –  Model SLX Connect Pulling Wire Rope Connecting Rotary Cable Connector Swivel Joint – Donghuan Power

      China wholesale Cablecutters Factory – ...

      Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in order to release anti-twist...

    • OEM Wire Ratchet Tighte Factory –  BELT DRIVE VARIABLE SPEED WIRE ROPE TRACTION PULLING CABLE ELECTRIC POWER WINCH – Donghuan Power

      OEM Wire Ratchet Tighte Factory – BELT ...

      Product introduction  The product is used for the tensioning of various conductors, ground wires, OPGW and ADSS during tension setting out. Bull wheel with wear proof MC nylon lining segments. Infinitely variable tension control and constant tension conductor stringing. Spring applied hydraulic released brake acts automatically in case of hydraulic failure to ensu safety Attached two sets of hydraulic power output interface to connect hydraulic conductor reel stand. Hydraulic Traction with va...

    • China wholesale Cable Peeler Machine Factory –   Aluminum Nylon Sheave Conductor Aerial Cable Roller Stringing Pulley – Donghuan Power

      China wholesale Cable Peeler Machine Factory &#...

      Product introduction  Aerial Cable Roller Stringing Pulley is used to aerial electric power, communication cable and power cable construction . 10228 Suitable for ABC cable(bunch). Other pulleys are applicable to aerial electric power,communication cable and power cable. The sheaves of Aerial Cable Stringing Roller are made of aluminum alloy or high strength MC nylon. All the sheaves are mounted on ball bearings. The frame of pulley is made of galvanized steel. The steel wheel needs to be cu...

    • China wholesale Cable Roller Pulley Factory –  Tower hoisting internal suspension gin pole lifting pole frame structure internal suspended aluminum alloy holding pole – Donghuan Power

      China wholesale Cable Roller Pulley Factory ...

      Product introduction Hydraulic Type Cable Reel Stand is applicable to be as the support of large cable reel in laying cables. Large load-bearing, easy to use. Hydraulic Type Cable Reel Stand is composed of two supports and a shaft bar, and its structure is simple. The supports is easy to move with the trundles in the bottom. Hydraulic Type Cable Reel Stand uses hydraulic to lift. The latch fixes the lifting position. Avoid long-term load-bearing of hydraulic jack. Hydraulic lifting is light a...

    • OEM Reel Stand Factory –  Hexagon Twelve Strands Hexagon Eighteen Strands for 9-34mm Galvanized Braided Anti Twisting Steel Wire Rope – Donghuan Power

      OEM Reel Stand Factory – Hexagon Twelve...

      Product introduction Anti twist steel wire rope is a special textile steel wire rope made of high-strength hot-dip galvanized high-quality steel wire through special processing. It is also called non rotating steel wire rope because its cross section is hexagonal and does not twist when stressed. Compared with ordinary round strand wire rope, it has the advantages of high strength, good flexibility, corrosion prevention and rust prevention, no gold hook, not easy to knot, long service life an...

    • China wholesale Hydraulic Lug Crimping Tool Factory –  Heavy Duty Crimp Cable Press-Fit Tool Split-Type Hydraulic Crimping Pliers – Donghuan Power

      China wholesale Hydraulic Lug Crimping Tool Fac...

      Product introduction Hydraulic crimping pliers is a professional hydraulic tool suitable for crimping cables and terminals in power engineering. The split hydraulic crimping pliers can be used with the hydraulic pump (the commonly used hydraulic pump is gasoline powered hydraulic pump or electric hydraulic pump, The output pressure of the hydraulic pump is ultra-high pressure, and the pressure reaches 80MPa.). The specifications and models of hydraulic crimping pliers range from 60 tons to 30...