Stringing Construction Bundled Conductor Aerial Helicopter Stringing Pulley
Product introduction
In the harsh environment such as mountains, valleys and rivers, it is not convenient to manually lay the guide rope on the ground, the helicopter can be used to pull the guide rope and directly hang it in the pulley groove of the Aerial Helicopter Stringing Pulley. Convenient for subsequent wire laying.
The guide rope enters the pulley groove through the guide rope guide arm, eccentric rotating door and other mechanisms in the Aerial Helicopter Stringing Pulley.
The Aerial Helicopter Stringing Pulley of different specifications and sizes shall be selected according to different lines. The Aerial Helicopter Stringing Pulley can be divided into single sheave, three sheaves, five sheaves. Material of pulley can be divided into MC nylon material, aluminum alloy material, nylon sheave coated rubber and aluminum sheave coated rubber. The intermediate sheave can also be steel sheave.
Aerial Helicopter Stringing Pulley TECHNICAL PARAMETERS
Item number |
Model |
Outside Diameter Of Sheave(mm) |
Sheaves |
10321 |
SHDN508Z |
Φ508×75 (508*100) |
1 |
10322 |
SHSN508Z |
3 |
|
10323 |
SHWN508Z |
5 |
|
10324 |
SHDN660Z |
Φ660×100 (660×110) |
1 |
10325 |
SHSN660Z |
3 |
|
10326 |
SHWN660Z |
5 |
|
10326-1 |
SHDN822Z |
Φ822×110 |
1 |
10326-2 |
SHSN822Z |
3 |
|
10326-3 |
SHWN822Z |
5 |
|
10327 |
SHDN916Z |
Φ916X110 |
1 |
10328 |
SHSN916Z |
3 |
|
10329 |
SHWN916Z |
5 |