Stringing Block Special Block press rising wire pressing pulley Hold Down pulley

Short Description:

The pressing pulley is mainly used to press the rising traction rope, conductor or ground wire during paying off.


Product Detail

Product Tags

Product introduction 

When paying off in high mountains and mountains, the height difference between iron towers is large, so it is very easy for the traction rope, conductor or ground wire to slip out of the paying off pulley groove when it is rised. The pressing pulley is mainly used to press the rising traction rope, conductor or ground wire during paying off.
When it is applicable to wire rope or steel strand, the pulley is made of steel wheel. When applicable to the conductor, the pulley is made of nylon wheel, aluminum wheel or rubber coated aluminum wheel.

OPGW MESH SOCK JOINTS TECHNICAL PARAMETERS

Item number

Model

Applicable Conductor

Rated Load

(KN)

Weigh

(kg)

Remarks

10241

SHY10L

≤ ACSR40028mm)

10

13

Aluminum Sheave
With Rubber Liner

10242

SHY10G

≤ACSR120(14mm

10

20

Steel Sheave

10243

SHY25N

≤ ACSR72038mm)

25

16

MC Nylon Sheave

10244A

SHY40G

≤ 28mm

40

55

Steel Sheave

10244B

SHY40L

≤ ACSR72038mm)

40

39

Aluminum Sheave

10244C

SHY40N

≤ ACSR72038mm)

40

34

MC Nylon Sheave


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • ACSR steel strand Ratchet Cutting Tools Manual Ratchet conductor Cutter

      ACSR steel strand Ratchet Cutting Tools Manual ...

      Product introduction  The conductor cutter is used to cut off various conductor and steel strand. 1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The conductor cutter has convenient operation, is labor saving and safe and can not damage conductor and human bodies. 4.Ratchet fee...

    • WIRE ROPE PULLEY CONDUCTOR HIGH SPEED TURNING STRINGING BLOCK

      WIRE ROPE PULLEY CONDUCTOR HIGH SPEED TURNING S...

      Product introduction  High speed steering block is apply to steel wire rope traction and turning During tension paying off. Its pulley groove can pass through steel wire rope Anti-twist Fixed Joint. The pulley of high-speed steering block is made of steel, which is divided into hanging plate open type and 8-ring closed type. High strength, heavy load, wear resistance. The maximum allowable speed of hauling rope is 80m/min. 12141B is front and rear double wheel type, ...

    • Fast Power Cable Pulling Capstan Electric Diesel Gasoline Powered Winch

      Fast Power Cable Pulling Capstan Electric Diese...

      Product introduction The Diesel Gasoline Powered Winch for Lifting is used in power transmission and distribution engineering, tower erection, traction cable, hoisting heavy objects , pole setting,stringing wire in electrical power line construction, the winch is driven by shaft drive,effectively prevent the damage of overload. Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope. Acc...

    • ALUMINIUM CONDUCTORS ACSR TWO THREE FOUR SIX BUNDLED CONDUCTORS LIFTER

      ALUMINIUM CONDUCTORS ACSR TWO THREE FOUR SIX BU...

      Product introduction  1. CONDUCTORS LIFTER is used to lift the bundled wires. it is used lifting tackle to balance lifting hook height. Double conductor lifters are used for lifting double bundled conductors, three conductor lifters are used for lifting triple bundled conductors, four conductor lifters or two groups of double conductor lifters are used for lifting four bundled conductors, and six conductor lifters or three groups of double conductor lifters or one gr...

    • PARALLEL GRIPPER Earth Wire Come Along Clamp PARALLEL Earth Wire Gripper

      PARALLEL GRIPPER Earth Wire Come Along Clamp PA...

      Product introduction  Earth Wire Gripper is suitable for the steel strand adjustment of the guyed tower and the ground wire tightening. 1.High class steel forged, thick&heavy, quality guaranteed. 2.Compact, smooth gap, thickness enhaced pulling handle, flexible&easy use. 3.The clamp adopts antiskid processing, with pretightening force. 4. All gripping jaws are produced with new technology to increase jaw life. 5. The parallel clamping structure is adopted, so...

    • Balancing Head Board Anti Twist Board OPGW Twist preventer

      Balancing Head Board Anti Twist Board OPGW Twis...

      Product introduction  Uses: for OPGW construction. If the optical cable is twisted during traction, it will be damaged. OPGW Twist preventer can prevent optical cable from twisting during traction. Two OPGW Twist preventer are used in a group. The gap ofanti OPGW Twist preventer are is 2m. Directly fixed on the OPGW. OPGW Twist preventer can pass through Pulley above Φ660mm. OPGW Twist preventer TECHNICAL PARAMETERS Item number Cable Diameter (mm) To...