Braided Dinima DuPont Silk Nylon Synthetic Fiber Traction Rope
Product introduction
The high-strength traction rope used for electric paying off traction has high breaking strength, light weight, water resistance, UV resistance, corrosion resistance, acid and alkali resistance, and is covered with a wear-resistant sheath. The product is soft and has a long flexural life. And the product has good insulation.
The material of high-strength traction rope is generally divided into Dinima fiber, DuPont silk and nylon according to the requirements of traction strength.
The inner core is made of 12 strands of twisted fiber, with high strength. The outer sheath is made of 24 strands of tightly woven, with good wear resistance.
The high tensile strength of high-strength traction rope can effectively improve the load. Its low elongation can effectively control the sag, making the sag drop as small as possible under load.
The good insulation and moisture-proof performance of high-strength traction rope can ensure the safety of personnel and equipment during live crossing construction.
The material of high-strength traction rope is light. Under the condition of the same breaking tensile strength, the weight per meter of high-strength traction rope is only 15% of that of steel wire rope. The use of high-strength traction rope is conducive to reducing labor intensity and improving work efficiency.
The high-strength traction rope has good bending fatigue resistance, wear resistance, weather resistance, UV protection, chemical corrosion resistance and other characteristics, which is conducive to recycling in the crossing construction.
High strength braided nylon rope TECHNICAL PARAMETERS
Nylon material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
8.6 |
20±0.3 |
16 |
41.6 |
153±1.5 |
|
8 |
12.8 |
44±0.5 |
18 |
51.2 |
193±2 |
|
10 |
17.6 |
63±1 |
20 |
60.8 |
222±3 |
|
12 |
24 |
93±1 |
22 |
70.4 |
268±3 |
|
14 |
32.3 |
117±1.5 |
24 |
80 |
318±4 |
DuPont silk material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
10 |
35±0.3 |
14 |
60 |
148±1.5 |
|
8 |
16 |
60±0.5 |
16 |
80 |
180±1.5 |
|
10 |
30 |
80±1 |
18 |
100 |
230±2 |
|
12 |
50 |
114±1 |
20 |
120 |
290±3 |
Dinima material
|
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
Diameter(MM) |
Break force(>KN) |
Linear density(G/M) |
|
6 |
19 |
16±0.3 |
14 |
137 |
113±1.5 |
|
8 |
31.9 |
28±0.5 |
16 |
180 |
150±1.5 |
|
10 |
58.8 |
48±1 |
18 |
211 |
177±2 |
|
12 |
92.5 |
77±1 |
21 |
296 |
247±3 |
Related products
-
660mm Wheels Sheaves Bundled Wire Conductor Pul...
Product introduction This 660*100mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ660 × Φ560 × 100 (mm). Under normal circumstances，its maximum suitable conductor is ACSR500, which means that the aluminum of our conducting wire has the maximum cross section of 500 square millimeters. The maximum diameter through which the sheave passes is 75mm. Under normal circumstances, the model of the maximu...
-
DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HO...
Product introduction Both side opening hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation. The hoisting tackle group formed by the combination of hoisting tackle can change the direction of the traction wire rope of the hoisting tackle and the hoisting tackle group and lift or move objects for many times. Product is made of both side opening steel side plate with steel wheel. The wheel has good wear...
-
ACSR Steel Strand CHAIN TYPE Cutting Tools Manu...
Product introduction The conductor cutter is used to cut off various conductor and steel strand. The maximum cut conductor diameter is 35 mm. 1.Cutting the ACSR or steel strand. Type selection shall be based on outer diameter. See the cutting range in the parameter table for details. 2.Because of its light weight, it is easy to carry. It can even be operated with only one hand. 3.The conductor cutter has convenient operation, is labor saving and safe and can not dam...
-
Diesel Engine Gasoline Powered Winch Cable Doub...
Double drum winch is used in power transmission and distribution engineering, telephone construction tower erection, traction cable, line, hoisting tools , tower erection , pole setting,stringing wire in electrical power line construction, the winch is driven by a belt,effectively prevent the damage of overload. The double drum structure can reduce the damage of the wire rope during traction.The power of the winch can be diesel power or gasoline power as required.The...
-
Lifting Pole Frame Aluminum Alloy Holding Inter...
Product introduction During used for transmission and distribution line engineering, The Internal Suspended Aluminum Alloy Holding Pole is used for internal suspension lifting of iron tower. Adopt single-arm style, free from direction restriction, use convenience. The main material adopts right angle aluminum alloy section, rivet joint makes, portable and durable. According to the height of the lifting power tower and the lifting load weight, the internal suspended a...
-
Gasoline Electric Power Conductor Cable Crimpin...
Product introduction The ultra high pressure hydraulic pump adopts gasoline power or electric power, and the output hydraulic pressure can reach 80MPa. Used together with crimping pliers and suitable crimping die, it is mainly used for conductor hydraulic crimping and cable hydraulic crimping. The output hydraulic pressure of the ultra-high pressure hydraulic pump rises rapidly, and the maximum output pressure can be reached instantly. At the same time, the output h...