Self Propelled Towing Machine Self-Moving Traction Machine
Product introduction
Self-Moving Traction Machine is suitable for line change project to spread OPGW, replace old conductor.
Self-Moving Traction Machine and Stringing Blocks Recovery Damper are used together.
Features
Use gasoline
Remote control operation
Use to spread OPGW,replace old conductor.
Self-Moving Traction Machine TECHNICAL PARAMETERS
|
Item No. |
20121 |
|
Model |
ZZC350 |
|
Block passed diameter range(mm) |
φ9～φ13 |
|
Maximum creeping angle(°) |
31 |
|
Gasoline Engine |
YAMAHA ET950/650W |
|
Driving dynamo type |
100YYJ140-3（140W） |
|
Remote control linear distance (m) |
300～500 |
|
Dimension(mm) |
422×480×758 |
|
Running speed(m/min) |
17 |
|
Horizontal pull(N) |
350 |
|
Weight(kg) |
46.5 |
Related products
-
DIESEL GASOLINE ENGINE TRACTION CABLE Tapered D...
Product introduction Tapered Drum Recovery Take-up Pulling Winch is used to withdraw the old conductors or erect the overhead earth wires. Tapered Drum Recovery Take-up Pulling Winch is powered by gasoline or diesel. The Tapered Drum Recovery Take-up Pulling Winch adopts tapered drum. The Tapered Drum Recovery Take-up Pulling Winch is convenient for cable recycling. RECOVERY TAKE-UP PULLING WINCH TECHNICAL PARAMETERS Item number Model Rated Load (KN) Pullin...
-
Manual Ratchet Tightener Insulating Ribbon Insu...
Product introduction The Insulated tightener uses non-conductive FRP insulated handle and soft corrosion-resistant and high tension woven belt to replace the steel wire rope. It is used for wire tightening during live line operation, and the voltage resistance is 15 kV (3 minutes) 1.The handle is made of glass fiber reinforced plastic insulation resin, with a withstand voltage of more than 15KV. It can be used for wire tightening, traction and lifting in live workin...
-
Optical Fiber Cable Stringing Block Cable OPGW ...
Product introduction The optical cable pulley is mainly used for laying various optical cables in the air. The sheaves are made of high strength MC nylon. The bottom of the pulley groove is provided with a small groove through the optical cable. All the sheaves are mounted on ball bearings. The frame of block is made of galvanized steel. U-shaped hanging plate is used for the head of the pulley, or the hanging plate shown the same as the single wheel paying off pull...
-
508mm Wheels Sheaves Bundled Wire Conductor Pul...
Product introduction This 508*75mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ508 × Φ408 × 75 (mm). Under normal circumstances，its maximum suitable conductor is ACSR400, which means that the aluminum of our conducting wire has the maximum cross section of 400 square millimeters. The maximum diameter through which the sheave passes is 55mm. Under normal circumstances, the model of the maximum...
-
Digital Wireless Pull Force Digital Tension Dyn...
Product introduction Digital Tension Dynamometer is a mechanical measuring instrument used for tension test. The Digital Tension Dynamometer is applicable to the measurement of traction and lifting load. Make sure that the traction and lifting load does not exceed the allowable load. The measurement unit of the Digital Tension Dynamometer can be switched between kg, lb and N. Digital Tension Dynamometer has the function of measuring peak value and keeping records. Ov...
-
MANUAL LIFT PULLER HAND WINCHES LIFTING HANDLE...
Product introduction 1. Wire rope pulling hoist is a new type of high-efficiency, safe and durable lifting machinery with three functions of lifting, pulling and tensioning. 2.The structure of the whole machine is reasonable in design，with safety self-locking device, high in safety factor and long in service life. 3. The casing is made of aluminum alloy, which is light and easy to carry and use. 4. The main rated lifting capacity is 8KN, 16KN, 32KN and 54KN. Stan...