Underground Cable Tools
-
DUAL-SHEAVE ALUMINUM STEEL BOTH SIDE OPENING HOISTING TACKLE
Both side opening hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation.
-
Cable Pulling Pulley Casting Sheave Hook Lifting Block Aluminum Wheel Hoisting Tackle
Aluminum wheel hoisting tackle is suitable for assemble and erect the tower,line construction,hoist devices and other hoist operation.
-
Nylon Steel Aluminum Wheels Turning Ground Roller Triple Sheaves Corner Cable Pulley
Cable Pulleys should always be used when pulling cables.When cables need to pass through pipes, use the Pipe Cable Pulley.
-
Nylon Aluminium Steel Three Wheel Cable Roller Pulleys Combined Triple Cable Pulley
Triple cable pulley should be used when pulling cables. Straight cable runs are pulled in using triple cable pulley suitably placed in the ground, avoid damaging cable surface sheath by friction between cable and ground. Straight cable runs are pulled in using triple cable pulley suitably placed in the cable trench to prevent the cable being dragged on the trench bottom or in mud. Cable roller spacing is dependent on cable type being laid and the cable pulling tension along the route. Leading cable rollers are used to support the cable over the entire drum width immediately before being pulled into the trench.
-
Pulley for traction of large diameter power cable Nylon steel aluminum wheel cable sheave
ylon pulley is made of MC nylon, which is mainly made of caprolactam material by heating, melting, casting and thermoplastic molding. The product has high strength, light weight, wear resistance and corrosion resistance. The traction load of the pulley is large.
-
Manual Foot Electric HIGH PRESSURE HYDRAULIC PUMP
Hydraulic pump range: manual hydraulic pump and electric hydraulic pump. Both manual pump and electric pump adopt：The output pressure of the hydraulic pump can reach 70MPa. High and low speed two stage design is for quick oil output.
-
HYDRAULIC CUTTING TOOL STEEL WIRE ROPE HYDRAULIC WIRE ROPE CUTTER
The hydraulic wire rope cutter is a special tool for cutting steel wire rope. Based on the hydraulic transmission principle, press the actuating hand up and down, press the movable piston of the oil pump, and the power extends outward with the piston to cut.
-
HYDRAULIC CRIMPING TOOL QUICK Integral HYDRAULIC CRIMPING PLIERS
The integral hydraulic crimping pliers has a double speed action: a fast advancing speed for rapid approach of the blades to the connector and a slower more powerful speed for crimping. Two-stage hydraulic system to improve work efficiency and more effort.
-
Hand Push Three-Wheeled Counter Cable Wire Conductor Length Measuring Instrument
The conductor length measuring instrument is apply to measure the spreading length of conductor or cable, also can measure bundle.
-
Lifting Traction Connecting Ring High Strength U-shaped Shackle D-shaped shackle
The shackle is suitable for lifting, towing, anchoring, tightening and other connections. D-type shackle is a special shackle for electric power construction,with small volume and light weight, large bearing weight and high safety factor.
-
Traction Anti Twist Wire Rope Cable Joints Connector Anti-twist Fixed Joint
Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes.
-
Wire Laying Steel Cable Socks Mesh Sleeve Net OPGW MESH SOCK JOINTS
The OPGW Mesh Socks Joint is used to hold the traction OPGW tightly. Also used for OPGW pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.