Optical Fiber Cable Stringing Block Cable OPGW Stringing Pulley
Product introduction
The optical cable pulley is mainly used for laying various optical cables in the air.
The sheaves are made of high strength MC nylon. The bottom of the pulley groove is provided with a small groove through the optical cable. All the sheaves are mounted on ball bearings. The frame of block is made of galvanized steel.
U-shaped hanging plate is used for the head of the pulley, or the hanging plate shown the same as the single wheel paying off pulley.
The wheel groove can be through with clamp pipe, aluminum tube, connector etc.
OPGW Cable Stringing Pulley TECHNICAL PARAMETERS
|
Item No. |
Sheave size（mm） |
Rated Load（KN） |
Weigh(kg) |
Feature |
|
20130 |
508*75 |
20 |
16 |
Small optical cable groove |
|
20131 |
660*100 |
20 |
27 |
|
|
20133 |
822*110 |
30 |
40 |
|
|
20132 |
916*110 |
50 |
50 |
Related products
-
Gasoline Electric Power Conductor Cable Crimpin...
Product introduction The ultra high pressure hydraulic pump adopts gasoline power or electric power, and the output hydraulic pressure can reach 80MPa. Used together with crimping pliers and suitable crimping die, it is mainly used for conductor hydraulic crimping and cable hydraulic crimping. The output hydraulic pressure of the ultra-high pressure hydraulic pump rises rapidly, and the maximum output pressure can be reached instantly. At the same time, the output h...
-
Balancing Anti Twist Board Twist preventer trac...
Product introduction Uses:for OPGW construction. The OPGW Head Board is used for pulling optical cables. Guide the optical cable into the pulley groove and prevent the optical cable from jumping out of the pulley groove. If the optical cable is twisted during traction, it will be damaged. OPGW Head Board can prevent optical cable from twisting during traction. OPGW Head Board TECHNICAL PARAMETERS Item number Structural Style Rated Load （KN） Hammer length ...
-
TRACTION LIFTING REVOLVE ANCHORING TEMPORARILY ...
Product introduction The rotary anchor is applied to fixing and fastening the winches, conductor pullers, conductor tensioners, conductor tractions，blocks and temporary pulling ropes in line construction. The rotary anchor is of welded structure of welding of round steel and spiral blade with corrosion-resistant primer on its surface, and it is durable in its quality. Bury the rotary anchor rotary drilling into the ground under the ground in appropriate depth and ma...
-
Hand Push Three-Wheeled Counter Cable Wire Cond...
Product introduction The conductor length measuring instrument is apply to measure the spreading length of conductor or cable, also can measure bundle. The conductor length measuring instrument consists of a frame, a pulley and a counter. Press down the roller of the counter and place the wire between the two pulleys of the length measurement instrument and the roller of the counter. The conductor length measuring instrument automatically clamps the wires. The rolle...
-
CONDUCTOR EARTH STRINGING BLOCK GROUNDING EARTH...
Product introduction The grounding earthing pulley is applicable to eliminate induced staticelectricity in conductor or grounding wire spread when tensioning erect wires . Notes : The grounding wire shall be configured separately. 1.Toeliminate induce electricity in conductor and grounding wire when releasingwires. 2.Mountedon the outlet side of tensioners or the inlet side of puller, and drawn by twostay grounding wires. 3.Tri-sheave mechanism ,compacted automatica...
-
1160mm Wheels Sheaves Bundled Wire Conductor Pu...
Product introduction This 1160mm Large Diameter Stringing Block possesses the dimension (outside diameter × groove bottom diameter × sheave width) of Φ1160 × Φ1000 × 150 (mm). Under normal circumstances，its maximum suitable conductor is ACSR1250, which means that the aluminum of our conducting wire has the maximum cross section of 1250 square millimeters. The maximum diameter through which the sheave passes is125mm. Under normal circumstances, the model of the maxi...