Wire Rope Cable Sleeve Connector GROUND WIRE OPGW ADSS Mesh Sock Joints
Product introduction
The Mesh Socks Joint is usually woven from hot-dip galvanized steel wire. It can also be woven with stainless steel wire. Apply to ADSS or OPGW cable Ground wire contruction.
As well as advantages of light weight, large tensile load, not damage line, convenient to use and so on.It is also soft and easy to grip.
Different materials, wires with different diameters and different weaving methods can be customized according to the cable outer diameter, traction load and use environment.
When paying off in the air, the Mesh Socks Joint is used to hold the traction conductor tightly. Also used for cable pulling hoisting, the Mesh Socks Joint is used for buried or pipe traction on ground power cables. It can pass all kinds of pay-off pulley.
The usage is as follows: First press the opening of the Mesh Socks Joint with the palm of your hand to open it, then start to wear the cable inward. The deeper the cable is worn, the greater the pulling force. The mesh body of the Mesh Socks Joint is in the form of a grid, and the tension is tightened during construction. After the construction is completed, you only need to apply force in the opposite direction to remove the Mesh Socks Joint. The Mesh Socks Joint can be pulled by hand or lifting tool to achieve the function of wiring and protecting the cable.
The Mesh Socks Joint is used together with the Swivel Joint to release the twisting force.
We can also be customized according to customer requirements, such as single side pulling Mesh Socks Joint, double side pulling Mesh Socks Joint and wrapping Mesh Socks Joint.
OPGW ADSS Mesh Sock Joints TECHNICAL PARAMETERS
|
Item number |
Model |
Applicable Optical Cable Diameter (mm) |
Rated Load (KN) |
Length (m) |
|
20105A |
SLE-1 |
Φ7-11 |
10 |
1.4 |
|
20105B |
SLE-1.5 |
Φ11-15 |
15 |
1.4 |
|
20105C |
SLE-2 |
Φ15-17 |
20 |
1.4 |
|
20105D |
SLE-2.5 |
Φ17-22 |
25 |
1.4 |
Related products
-
Hooked Conductor Stringing Block Sitting Hangin...
Product introduction Hanging Dual-Use Stringing Pulley have are used to support conductors,OPGW,ADSS, communicatio lines. The sheave of the pulley are made from higth strength nylon,or aluminum materials ,and the frame of are made of galvanized steel. All kinds of pulley blocks can be manufactured according to the customers's requirements. Product can be used in hanging type stringing pulley or skyward stringing pulley. The sheaves of stringing pulley are made of al...
-
Connect Pulling Wire Rope Connecting Rotary Con...
Product introduction: Swivel Joints are a commonly used tools for traction connection in the construction and maintenance of electric power, telecommunications and railway electrification overhead lines. It is suitable to traction of connecting anti-twisting wire rope and conductor. During the construction of transmission lines, traction of overhead conductor or underground cables, it is used to connect with the mesh sock, head board and anti-twisting wire rope, in o...
-
Traction Anti Twist Wire Rope Cable Joints Conn...
Product introduction Anti-twist Fixed Joint is applicable to the connection of wire rope, anti twist wire rope, Dinima rope, DuPont wire rope and other traction ropes. The minimum traction load is 10KN, and the maximum traction load is 25KN. The anti-twist fixed joint is made of 40 chrome alloy steel. 1. High strength, small size, light weight, and good looking. 2. It smoothly can pass through the corners, pulley, tension machine, traction machine and other equipmen...
-
Drum Brake Hydraulic Brake Spiral Rise Hydrauli...
Product introduction During the construction of the line, it is applicable to be as the support of conductor and large cable reel in laying cables. They have equipped with a braking device. There are two kinds of braking devices: manual mechanical brake disc and hydraulic motor brake. The lifting device is divided into two types: manual screw lifting and manual hydraulic lifting. The paying off frame with hydraulic motor brake can be connected with the hydraulic outp...
-
POWER TOWER Aluminum Extension Pole A-Shape Tub...
Product introduction A-Shape Tubular Gin Pole is used for transmission and distribution line engineering, sling tower material, positioning pulley set use. A-Shape Tubular Gin Pole is used for assembling power stringing tower. The main material adopts high strength aluminum alloy pipe, rivet joint makes, portable and durable. It is mainly made of high-strength aluminum alloy pipes of 2 specifications. The specifications are: outer diameter 150mm * thickness 6mm and o...
-
Hydraulic Traction Conductor Stringing Equipmen...
Product introduction The Hydraulic Traction is used for the traction of various conductors, ground wires, OPGW and ADSS during tension setting out. Infinitely variable speed and pull force control ,the pull in the rope can be read on the line pull gauge . The max pull for conductor–stringing operation can preset ,automatic overload protection system . Spring applied –hydraulic release brake acts automatically in case of hydraulic failure ensure to safety . With hydra...